Bedienungsanleitung Cuisinart FP1300 Expert Prep Pro (Seite 11 von 28) (Englisch)

802965

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

General Assembly Instructions

Before First Use

Before using your Expert Prep Pro for the first time, wash and dry all the parts thoroughly (see

Cleaning, Storage and Maintenance section).

Work Bowls

• The Food Processor is supplied with two work bowls.

• The large work bowl has a maximum capacity of 3L and can be used with the Large Chopping/

Mixing Blade, Dough Blade, Adjustable Slicing Disc, Reversible Shredding/Grating Disc, Dicing Kit

& Spiralising Kit.

•

The small work bowl has a maximum capacity of 0.95L and can be used with the Small Chopping/

Mixing Blade only. When the Work Bowl Cover is fitted, it prevents any leakage into the large work

bowl, allowing you to use the small bowl without the need to wash up the large bowl after use.

N.B. The large work bowl must always be fitted before the small work bowl can be set up inside.

It will not always be possible to use the work bowls to their maximum capacity. The amount of food/

liquid you can process in the bowls will depend on the density of the ingredients in the work bowl

and the consistency of the desired end result. If you find that the motor is struggling or that the

processing results are uneven, then we would recommend that you reduce the amount of ingredients

in the work bowl and instead process in batches.

For liquid, we recommend that you do not fill the bowls above the Maximum Liquid Fill markings on

each bowl (1800ml on the large work bowl and 400ml on the small work bowl.) This is to avoid liquid

spilling into the central spindle which may cause leakage.

Chopping certain foods may scratch or cloud the work bowl; this will not affect the functionality of

the bowls.

Main Work Bowl & Cover Operation

1. Place the food processor base on a dry, level worktop with the controls facing toward you. Do not

plug the unit in until it is fully assembled.

2. Place the Large Work Bowl on the base and use the handle to turn the bowl anticlockwise to lock

it into place.

3. To use the Small Work Bowl, first attach the Large Work Bowl to the base. Place the Stem Adapter

onto the shaft, then lower the Small Work Bowl over the adapter and into the Large Work Bowl.

Place your fingers in the recesses of the Small Work Bowl and turn slightly to secure, until the

bowl drops into place (it will still be possible to move the bowl slightly from side to side).

4. Place the workbowl cover over the large work bowl with the feedtube assembly shifted slightly to

the right of the handle.

5. Once the cover is fully seated, rotate it to the left

(clockwise) to engage the lid-locking mechanism and

interlock. It should click into place.

6. To remove the cover, turn anticlockwise until it will

not turn any further, then lift to release.

NOTE:

You cannot remove the work bowl before removing

the work bowl cover.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cuisinart FP1300 Expert Prep Pro Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cuisinart FP1300 Expert Prep Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info