Bedienungsanleitung Cupra Ateca - 2022 (Seite 56 von 357) (Englisch)

810370

Zoom out

Zoom in

Vorherige Seite

1/357

Nächste Seite

Safety

Attachment systems overview

●ISOFIX: ISOFIX is a standardised attachment

system allowing quick and safe attachment of

child seats in the vehicle. ISOFIX attachment

establishes a rigid connection between the

child seat and the car body.

The child seat has two rigid attachment clips,

called connectors. These connectors are t-

ted into the ISOFIX attachment rings found

between the seat cushion and the backrest

of the vehicle's back seat (on the sides). ISO-

FIX attachment systems are used mainly in Eu-

rope ›››page54. If necessary, ISOFIX at-

tachment may have to be supplemented with a

Top Tether belt or a support bracket.

●Automatic three-point seat belt. Whenever

possible, it is preferable to attach the child

seats with the ISOFIX system rather than at-

taching them with an automatic three-point

seat belt ›››page58.

Additional attachment:

●Top Tether: the Top Tether belt is guided

over the back of the rear seat and attached to

an anchor point with a hook. Anchor points are

located at the back of the rear seat backrest on

the luggage compartment side ›››page57.

The rings for retaining the Top Tether belt are

marked with an anchor symbol.

●Support bracket: some child seats rest on

the oor of the vehicle with a support bracket.

The support bracket prevents the child seat

from tipping forward in the event of impact.

Child seats tted with a support bracket should

only be used in the passenger seat and side

rear seats ››› . For the assembly of this type

of seat you should also consult the list of ap-

proved vehicles for this assembly, available in

the instructions for child restraint systems.

Recommended systems for attaching child

seats

CUPRA recommends attaching child seats as

follows:

●Baby carriers or child seats in the oppo-

site direction of travel: ISOFIX and support

bracket or i-Size.

●Child seats in the direction of travel: ISOFIX

and Top Tether.

WARNING

Incorrect use of the support bracket can

cause serious or fatal injury.

●Make sure the support bracket is correctly

and safely installed.

●When the base of the child seat is sup-

porting the child’s weight, the support foot

should not hang in the air or be supplemen-

ted with objects. In addition, make sure that

the base of the child seat is always supported

by the surface of the vehicle's seat. The sup-

port leg of the child seat should not raise the

base of the child seat o the surface of the

vehicle's seat.

Securing the child seat with the

ISOFIX or i-Size system

The marking of ISOFIX or i-Size anchor points

depends on the equipment and the country in

question.

See the following tables to understand the

compatibility of the ISOFIX/i-Size systems in

the vehicle:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca - 2022 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca - 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info