Bedienungsanleitung Cupra Ateca - 2022 (Seite 69 von 357) (Englisch)

810370

Zoom out

Zoom in

Vorherige Seite

1/357

Nächste Seite

Opening and closing

Keyless Access system

BLocking sensor surface on the outside of

the door handle.

Depending on the equipment, the vehicle may

have the Keyless Access system. This is a key-

less locking and starting system that can un-

lock and lock the vehicle without actively using

its key. For this, it is only necessary that there

is a valid vehicle key in the detection area cor-

responding to the attempted access to the ve-

hicle.

Conguring the Keyless Access system

The behaviour of the Keyless Access system

can be adjusted in the Vehicle settings menu

of the Infotainment system ›››page32.

If the Keyless Access function is disabled, its

operation is limited.

Unlock the vehicle

●Touch the sensor surface on the inside of the

handle A. All turn signals ash twice.

If selective opening is tted, touching the sen-

sor's surface twice unlocks the entire vehicle.

If the vehicle is not unlocked for an extended

period, the function is deactivated. The func-

tion will reactivate the next time that the vehi-

cle is unlocked with the remote control.

Lock the vehicle

●Park the vehicle.

●Touch the sensor surface ›››Fig.47 B on

the outside of the door handle. All turn signals

ash once.

To check that the vehicle is properly locked,

the unlocking function is deactivated for a few

seconds.

Unlocking the rear lid

When the vehicle is locked, the rear lid auto-

matically unlocks when it is opened if there is

a vehicle key in its proximity zone. The rear lid

locks again after closing.

Temporarily deactivating the Keyless Access

system

The “Keyless Access” system’s unlocking func-

tion can be temporarily deactivated:

●Move the gear lever to position P since oth-

erwise the vehicle cannot be locked.

●Lock the vehicle using the button on the

vehicle key.

● Within 5 seconds, touch the sensor on the

outside of the door handle ›››Fig.47 B

once. Do not grip the handle while doing so.

This temporarily deactivates the Keyless Ac-

cess system.

●Check that it is deactivated by pulling the

door handle after at least 10 seconds. It should

not be possible to open the door.

The next time, the vehicle can only be un-

locked electronically with the vehicle key. After

being unlocked the next time, the Keyless Ac-

cess system will be activated again ››› .

Permanently disabling the Keyless Access

system

The Keyless Access system can also be perma-

nently deactivated in the infotainment system

››› .

Convenience functions

To close all the electric windows and the sun-

roof using the comfort function, keep a nger

for a few seconds on the locking sensor sur-

face ›››Fig.47 B of the door handle until the

windows and roof have closed.

How the doors open when touching the sen-

sor surface on the door handle will depend on

the settings that have been activated in the

infotainment system, using the function but-

ton > Settings > Opening and clos-

ing.

NOTICE

Deactivating the Keyless Access system also

deactivates the sensor controlled opening

and closing of the rear lid, although the func-

tion is shown as “active” in the vehicle menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca - 2022 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca - 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info