Bedienungsanleitung Cupra Ateca 2018 (Seite 265 von 372) (Englisch)

817302

265

Zoom out

Zoom in

Vorherige Seite

1/372

Nächste Seite

Driver assistance systems

●Do not cover the area of vision of the

camera.

●Check that the area of vision of the wind-

screen camera is not damaged.

Note

●The lane departure warning system has

been exclusively developed for driving on

paved roads only.

●If the Lane Assist system does not work as

described in this chapter, do not use it and

contact a specialised workshop.

●Before starting a journey, verify that the

field of vision of the camera is not covered

››› Fig. 217.

●Always keep the field of vision of the

camera clean.

●If there is a fault in the system, have it

checked by a specialised workshop.

Traffic Jam Assist

Description and operation

Traffic Jam Assist helps the driver keep the

car within its lane and to move in convoy in

case of traffic congestion or slow traffic.

Traffic Jam Assist is an additional function of

Lane Assist ››› page 260 and combines Lane

Assist functions with Adaptive Cruise Control

(ACC) ››› page 251. Therefore, it is essential

that you read these two chapters carefully

and note the limitations of the systems and

the information about them.

Operation of Traffic Jam Assist

At speeds of below 60 km/h (40 mph), Traf-

fic Jam Assist can maintain a (temporary) dis-

tance preset by the driver with respect to the

vehicle ahead and help stay within the lane

››› .

To do this, the system automatically controls

the accelerator, brakes and steering, and

slows the vehicle, stopping it fully if neces-

sary, when faced with a vehicle in front that

has stopped. It automatically moves off again

when the vehicle ahead moves.

Traffic Jam Assist is designed only for use on

motorways and wide roads. Therefore, never

use it in city traffic.

Technical requirements for using Traffic

Jam Assist

●Lane departure warning must be activated:

Infotainment button  > SETTINGS >

Driver assistance > Lane departure

warning (Lane Assist) function button

››› page 33.

●Adaptive lane guidance must be activated:

Infotainment button  > SETTINGS >

Driver assistance > Lane Assist func-

tion button .

●Adaptive Cruise Control (ACC) must be

connected and active ››› page 254.

●The speed must be below 60 km/h

(38 mph).

Traffic Jam Assist is not active (the Lane

Assist control light turns yellow)

●If any of the conditions mentioned on

page 263, Technical requirements for us-

ing Traffic Jam Assist are no longer met.

●If any of the conditions required for opera-

tion of the Lane Assist are not met

››› page 260.

●If any of the conditions necessary for the

adaptive cruise control (ACC) to work are no

longer fulfilled ››› page 251.

Situations in which Traffic Jam Assist must

be switched off

Due to the limitations of the system, Traffic

Jam Assist must always be switched off in the

following situations:

●When more attention is required by the

driver.

●When driving in a very sporty style.

●In adverse weather conditions, e.g. in case

of snow or heavy rain.

●When driving on roads in poor condition.

●In sections with roadworks.

●In city journeys. »

263

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2018 Seite 265

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info