Bedienungsanleitung Cupra Ateca 2018 (Seite 273 von 372) (Englisch)

817302

273

Zoom out

Zoom in

Vorherige Seite

1/372

Nächste Seite

Driver assistance systems

Using the blind spot detector (BSD)

with parking assistant (RCTA)

Activating and deactivating the blind spot

detector (BSD) with parking assistant

(RCTA)

The blind spot detector with parking assis-

tant can be switched on and off by accessing

the Assistance systems menu on the dash

panel display using the steering wheel con-

trols. If the vehicle is equipped with a multi-

function camera, it can also be accessed by

means of the driver assistance systems key

located on the main beam headlight lever.

Open the Assistants menu.

● Blind spot

● Exit Assist

If the verification box on the control panel is

checked , the functionality will be auto-

matically activated at ignition.

When the blind spot detector is ready to op-

erate, the indications in the external mirrors

will turn on briefly as confirmation.

When the vehicle is restarted, the last ad-

justment in the system will remain active.

If the blind spot detector was automatically

deactivated, it will only be possible to restart

the system after turning the vehicle off and

restarting it.

Automatic deactivation of the blind spot

detector (BSD)

The radar sensors of the blind spot detector

with rear cross traffic alert will be automati-

cally deactivated when, among other rea-

sons, one of the sensors is detected to be

permanently covered. This may be the case

if, for example, there is a layer of snow or ice

in front of one of the sensors.

The relevant text message will appear in the

dash panel display.

Trailer mode

The Blind spot detector and the rear cross

traffic alert will be automatically deactivated

and it will be impossible to activate them if

the tow hitch is electrically connected to a

trailer or other similar object.

As soon as the driver starts to drive with a

trailer connected electrically to the vehicle, a

message will appear on the instrument panel

display indicating that the blind spot detec-

tor and the rear cross traffic alert are deacti-

vated. Once the trailer has been unhitched

from the vehicle, if you want to use the blind

spot detector and the rear cross traffic alert,

you will have to reactivate them in the corre-

sponding menu.

If the towing hitch is not factory equipped,

then the blind spot detector and the rear

cross traffic alert will have to be deactivated

manually when driving with a trailer.

Drive Profile*

Introduction

The Drive Profile enables the driver to

choose between six profiles or modes, Com-

fort, Sport, Cupra, Individual, Offroad

and Snow, that modify the behaviour of vari-

ous vehicle functions, providing different

driving experiences.

The Individual profile can be configured

according to personal preferences. The oth-

er profiles have a fixed configuration.

Description

Depending on the equipment fitted in the

vehicle, the Drive Profile can operate on the

following functions:

Engine

Depending on the profile selected, the en-

gine responds more spontaneously or more

in harmony with the movements of the ac-

celerator.

The gear change points are modified to posi-

tion them in lower or higher engine speed

ranges. »

271

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2018 Seite 273

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info