Bedienungsanleitung Cupra Ateca 2018 (Seite 298 von 372) (Englisch)

817302

298

Zoom out

Zoom in

Vorherige Seite

1/372

Nächste Seite

Driving

●The camera will stop transmitting images

above the speed of 15 km/h (9 mph) with re-

verse engaged.

In combination with the Parking System Plus

››› page 283, the camera image will cease to

be transmitted immediately when reverse

gear is disengaged or when the selector lever

is moved from the R position, and the optical

information provided by the Parking Aid sys-

tem will be displayed.

Also in combination with the system, the rear

assist image can also be concealed:

●By pressing one of the Infotainment system

buttons on the display.

●OR: by pressing the miniature vehicle that

appears on the left of the screen (which

switches to the full-screen mode of the

Parking System Plus's optical system).

If you wish to display the rear assist image

again:

●Disengage reverse, or change the selector

lever's position, engage reverse again or

move the selector lever to position R.

●OR: Press the RVC function button1)

Meaning of the orientation lines

››› Fig. 242

Side lines: extension of the vehicle (the

approximate width of the vehicle plus the

rear view mirrors) on the road surface.

End of the side lines: the area marked in

green ends approximately 2 m behind

the vehicle on the road surface.

Mid line: indicates a distance of approxi-

mately 1 m behind the vehicle on the

road surface.

Horizontal red line: indicates a safe dis-

tance of approximately 40 cm at the rear

of the vehicle on the road surface.

Parking manoeuvre

●Stop the vehicle in front of a parking space

and place the selector lever in the R position.

●Reverse slowly, and turn the steering wheel

so that the side orientation lines lead to-

wards the parking space.

●Guide the vehicle into the parking space so

that the side orientation lines run parallel to

it.

Towing bracket device*

Trailer mode

Introduction

Take into account country-specific regula-

tions about driving with a trailer and the use

of a towing bracket.

The vehicle has been developed primarily for

carrying people, although it can also be used

to tow a trailer if fitted with the correspond-

ing technical equipment. This additional load

has an effect on the useful life, fuel con-

sumption and vehicle performance and in

some cases can reduce the service intervals.

Driving with a trailer requires more force

from the vehicle, and thus more concentra-

tion from the driver.

In winter, winter tyres should be fitted on

both the vehicle and the trailer.

Maximum vertical load technically permis-

sible on the coupling

The maximum vertical load technically per-

mitted from the trailer draw bar on the tow-

ing bracket's tow hitch is 80 kg.

1) WARNING: the RVC function button will only be

activated and available when the selector lever is

set to position R.

296

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2018 Seite 298

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info