Bedienungsanleitung Cupra Ateca 2020 (Seite 318 von 352) (Englisch)

817296

318

Zoom out

Zoom in

Vorherige Seite

1/352

Nächste Seite

Maintenance

Do not use a nozzle that sprays the water out

in a direct stream or one that has a rotating

jet for forcing off dirt.

The water temperature must not exceed

60°C.

Automatic car washes

Spray the vehicle before starting the car

wash.

Make sure that the windows and the panor-

amic sunroof* are closed and the wind-

screen wipers are deactivated. Bear in mind

the instructions of the car wash tunnel oper-

ator, especially if your vehicle has detacha-

ble parts.

Use of car washes without brushes if possi-

ble.

Washing by hand

Clean your vehicle from top to bottom with a

soft sponge or with a brush. Only use clean-

ing products that do not contain solvents.

Washing vehicles with a matte paint by

hand

To prevent damage to the vehicle when

washing it, first remove the thicker dust and

dirt. To remove traces of insects, grease and

fingerprints, it is best to use a special cleaner

for matte paint.

Apply the product with a microfibre cloth. To

avoid damaging the surface of the paint, do

not apply too much pressure.

Rinse with plenty of water. Then clean it with

a neutral cleaning product and a soft micro-

fibre cloth.

Rinse the vehicle again with plenty of water

and then leave it to dry. Remove traces of

water with a leather cloth.

WARNING

●Only wash the vehicle with the ignition

switched off or according to the specifica-

tions of the car wash tunnel operator. Risk

of accident!

●When cleaning the underbody or the in-

side of the wheel arches, protect yourself

from sharp or pointy metal parts. Risk of

cut!

●After cleaning the brakes could act more

slowly due to moisture or, in winter, the ice

on the brake discs and pads. Risk of acci-

dent! In this case the brakes should be

dried by pressing the brake pedal several

times.

CAUTION

●Before washing the vehicle in an auto-

matic car wash, please make sure to retract

the exterior mirrors to prevent them from

being damaged. Electric exterior rearview

mirrors must always be folded/deployed

electrically!

●Do not wash the vehicle in direct sunlight.

Risk of damaging the paint job!

●Do not use sponges, abrasive household

sponges or similar to clean insect remains.

Risk of damaging the surface!

●Vehicle parts with matte paint:

–Do not use polish or hard wax. Risk of

damaging the surface!

–Never select washing programs that in-

clude the use of wax. This could dam-

age the appearance of matte paint.

–Do not put stickers or magnets on parts

with matte paint, as removing them

may damage the paint.

For the sake of the environment

The car should only be washed in special

wash bays. These places are prepared to

prevent oily water from getting into the

public drains.

Cleaning and maintenance instruc-

tions

The cleaning and maintenance of individual

components of the vehicle can be checked

in the following tables. The contents should

be understood merely as a recommenda-

tion. Go to your specialised workshop if you

316

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2020 Seite 318

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info