Bedienungsanleitung Cupra Ateca 2023 (Seite 52 von 355) (Englisch)

817294

Zoom out

Zoom in

Vorherige Seite

1/355

Nächste Seite

Safety

Child seats by approval category

Child seats may have the approval category of

universal, semi-universal, vehicle specic (all

according to the ECE-R44 standard) or i-Size

(according to the ECE-R129 standard).

●Universal: child seats with universal approval

can be installed in all vehicles. There is no need

to consult any list of models. In the case of

universal approval for ISOFIX, the child seat is

additionally provided with a Top Tether belt.

●Semi-universal: semi-universal approval, in

addition to the standard requirements of uni-

versal approval, requires safety devices to lock

the child seat, which require additional test-

ing. Child seats with semi-universal approval

include a list of vehicle models for which they

can be installed.

●Vehicle-specic: vehicle-specic approval

requires a dynamic test of the child seat for

each vehicle model separately. Child seats with

vehicle-specic approval also include a list of

vehicle models for which they can be installed.

●i-Size: child seats with i-Size approval must

meet the requirements prescribed in the ECE-

R 129 standard in relation to installation and

safety. Child seat manufacturers can tell you

which seats have i-Size approval for this vehi-

cle.

Fitting and using child seats

Fig.33 Airbag sticker: on the passenger

side sunshade blind.

Fig.34 Airbag sticker: on the rear frame of

the passenger side door.

Warnings about tting a child seat

Take the following general warnings into ac-

count if you are going to t a child seat. They

are valid for all child seats regardless of their

attachment system.

●Please read and follow the child seat manu-

facturer's operating instructions.

●The child seat should preferably be tted to

the rear seat behind the front passenger seat

so that the child can exit the vehicle on the

pavement side.

●Set the height of the seat belt such that

it adapts to the child seat naturally, without

twisting. The lowest position of the seat belt

height regulator must be used with rear-facing

child seats.

●To correctly use a child seat in the back, the

front backrest must be adjusted so that there

is no contact with the child seat in the back in

the case that it goes opposite to the direction

of the car. In the case of front facing restraint

systems, the front backrest must be adjusted

so that there is no contact with the child's feet.

●For a correct assembly of the child's seat on

the rear seats, adjust or dismount the head-

rest, in order to prevent contact with the seat.

●If a semi-universal type chair is to be instal-

led, in which the method of attachment to

the car is through the seat belt and support

bracket, it should never be installed in the cen-

tral rear seat as the ground clearance is lower

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2023 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info