Bedienungsanleitung Cupra Formentor - 2020 (Seite 305 von 352) (Englisch)

817289

305

Zoom out

Zoom in

Vorherige Seite

1/352

Nächste Seite

Wheels

Low profile tyres

Low profile tyres have a wider tread, a larger

wheel diameter and a lower sidewall height.

Therefore, its driving behaviour is more agile.

Low profile tyres may deteriorate more

quickly than standard tyres, for instance due

to strong knocks, potholes, manhole covers

and kerbs. Correct tyre pressure is very im-

portant

››› page 305 .

To avoid damage to tyres and wheels, drive

with special care when driving on roads in

poor condition.

Visually check your wheels every 3000 km.

If the tyres or rims have received a heavy im-

pact or have been damaged, have a special-

ised workshop check whether or not it is

necessary to change the tyre.

Low profile tyres may deteriorate more

quickly than standard tyres.

Concealed damage

Damage to tyres and rims is often not readily

visible. If you notice unusual vibration or the

car pulling to one side, this may indicate

that one of the tyres is damaged. Reduce

speed immediately if there is any reason to

suspect that damage may have occurred. In-

spect the tyres for damage. If no external

damage is visible, drive slowly and carefully

to the nearest specialised workshop and

have the car inspected.

Foreign objects inserted in the tyre

●Do not remove foreign bodies if they have

penetrated through the tyre wall!

●If the vehicle comes with a tyre mobility

system, where necessary seal the damaged

tyre as shown in section

››› page 44 . Use a

specialised workshop for repair or replace-

ment. To do so, CUPRA recommends going

to a specialised CUPRA dealer or any SEAT

dealership.

The sealant at the lower part of the tyre

tread wraps around the foreign body and

provisionally seals the tyre.

Tyres with directional tread pattern

An arrow on the tyre sidewall indicates the

direction of rotation on single drive tyres. Al-

ways note the direction of rotation indicated

when mounting the wheel. This makes sure

that optimal use is made of tyre properties in

terms of aquaplaning, grip, excessive noise

and wear.

Subsequent fitting of accessories

If you wish to change or fit wheels, rims or

wheel trims, we recommend that you con-

sult with a specialised CUPRA Service or

SEAT Official Service centre for advice re-

garding current technical recommendations.

Speed symbols

The speed rating indicates the maximum

speed permitted for the tyres.

max. 150 km/h (93 mph)

max. 160 km/h (99 mph)

max. 170 km/h (106 mph)

max. 180 km/h (112 mph)

max. 190 km/h (118 mph)

max. 200 km/h (124 mph)

max. 210 km/h (130 mph)

max. 240 km/h (149 mph)

max. 270 km/h (168 mph)

max. 300 km/h (186 mph)

Some manufacturers use the letters “ZR” for

tyres with a maximum authorised speed

above 240 km/h (149 mph).

WARNING

●New tyres do not have maximum grip

during the first 500 km. Drive particularly

carefully to avoid possible accidents.

●Never drive with damaged tyres. This may

cause an accident.

●If you notice unusual vibrations or if the

vehicle pulls to one side when driving, stop

the vehicle immediately and check the

tyres. »

303

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2020 Seite 305

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info