Bedienungsanleitung Cupra Formentor - 2020 (Seite 309 von 352) (Englisch)

817289

309

Zoom out

Zoom in

Vorherige Seite

1/352

Nächste Seite

Wheels

The minimum permitted profile depth1) have

been reached when the tyres have worn

down to the wear indicators. Replace the

tyres with new ones ››› .

Changing wheels around

To ensure that the wear is equal on all tyres

the wheels should be changed round from

time to time according to the system

››› Fig. 195. The useful life of all the tyres will

then be about the same time.

WARNING

The tyres must be replaced at the latest

when the tread is worn down to the tread

wear indicators. Failure to follow this in-

struction could result in an accident.

●Particularly in difficult driving conditions

such as wet or icy roads. It is important that

the tyre tread be as deep as possible and be

approximately the same on the tyres of

both the front and the rear axles.

●The scant driving safety due to insuffi-

cient tread depth is particularly evident in

vehicle handling, when there is a risk of

“aquaplaning” in deep puddles of water

and when driving through corners, and

braking is also adversely affected.

●The speed has to be adapted accordingly,

otherwise there is a risk of losing control

over the vehicle.

Wheel nuts

The wheel nuts are matched to the rims.

When installing different wheels (for instance

alloy wheels or wheels with winter tyres) it is

important to use the correct wheel nuts with

the right length and correctly shaped bolt

heads. This ensures that wheels are fitted se-

curely and that the brake system functions

correctly.

The wheel nuts must be clean and turn easi-

ly.

A special adapter is required to turn the anti-

theft wheel nuts*

››› page 47 .

WARNING

Wheel nuts should never be greased or

oiled.

●Use only wheel nuts which belong to the

wheel.

●If the prescribed torque of the wheel nuts

is too low, they could loosen whilst the ve-

hicle is in motion. Risk of accident! If the

tightening torque is too high, the wheel

nuts and threads can be damaged.

CAUTION

See

››› page 49to find out the recommen-

ded tightening torque for wheel nuts for

steel and alloy rims.

Winter tyres

–Winter tyres must be fitted on all four

wheels.

–Only use winter tyres that are approved for

your vehicle.

–Please note that the maximum permissible

speed for winter tyres may be lower than

for summer tyres.

–Also note that winter tyres are no longer

effective when the tread is worn down.

–After fitting the wheels you must always

check the tyre pressures. When doing so,

take into account the correct tyre pres-

sures listed on the rear of the front left

door frame

››› page 305 .

In winter road conditions winter tyres will

considerably improve vehicle handling. The »

1) Follow the regulations of the country you are

driving in.

307

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2020 Seite 309

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info