Bedienungsanleitung Cupra Formentor - 2021 (Seite 74 von 391) (Englisch)

810365

Zoom out

Zoom in

Vorherige Seite

1/391

Nächste Seite

Operation

The Fatigue detection informs the driver

when their driving behaviour shows signs of

fatigue.

Function and operation

Fatigue detection determines the driving be-

haviour of the driver when starting a journey,

making a calculation of tiredness. This is

constantly compared with the current driv-

ing behaviour. If the system detects that the

driver is tired, an audible warning is given

with a sound and an optic warning is shown

with a symbol and complementary message

on the instrument panel display

››› Fig. 53 .

The message on the instrument panel dis-

play is shown for approximately 5 seconds,

and depending on the case, is repeated. The

system stores the last message displayed.

The message on the instrument panel dis-

play can be switched off by pressing the 

button on the multi-function steering wheel

››› page 80.

Conditions of operation

Driving behaviour is only calculated on

speeds above about 65 km/h (40 mph) up to

around 200 km/h (125 mph).

Switching on and off

Fatigue detection can be activated or deacti-

vated in the infotainment system using the

function button  > Assistants > Driver

alerts > Fatigue detection

››› page 89 . A

mark indicates that the adjustment has been

activated.

System limitations

The Fatigue detection has certain limitations

inherent to the system. The following condi-

tions can limit the Fatigue detection or pre-

vent it from functioning.

●At speeds below 65 km/h (40 mph)

●At speeds above 200 km/h (125 mph)

●When cornering

●On roads in poor condition

●In unfavourable weather conditions

●When a sporty driving style is employed

●In the event of a serious distraction to the

driver

Fatigue detection will be restored when the

vehicle is stopped for more than 15 minutes,

when the ignition is switched off or when the

driver has unbuckled their seat belt and

opened the door.

In the event of slow driving during a long pe-

riod of time (below 65 km/h, 40 mph) the

system automatically re-establishes the

tiredness calculation. When driving at a fast-

er speed the driving behaviour will be recal-

culated.

WARNING

Do not let the comfort afforded by the Fati-

gue detection system tempt you into taking

any risks when driving. Take regular breaks,

sufficient in length when making long jour-

neys.

●The driver always assumes the responsi-

bility of driving to their full capacity.

●Never drive if you are tired.

●The system does not detect the tiredness

of the driver in all circumstances. Consult

the information in the section

››› page 72,

System limitations.

●In some situations, the system may incor-

rectly interpret an intended driving ma-

noeuvre as driver tiredness.

●No warning is given in the event of the ef-

fect called microsleep!

●Please observe the indications on the in-

strument panel and act as is necessary.

Note

●Fatigue detection has been developed for

driving on motorways and well paved roads

only.

●If there is a fault in the system, have it

checked by a specialised workshop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2021 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info