Bedienungsanleitung Cupra Formentor - 2022 (Seite 26 von 396) (Englisch)

810366

Zoom out

Zoom in

Vorherige Seite

1/396

Nächste Seite

Driver information

Driver alert system (break recom-

mendation)

Fig.8 On the screen of the instrument

panel: fatigue detection.

The driver alert system informs the driver when

it deduces tiredness due to his/her behaviour

at the wheel.

Function and operation

Fatigue detection determines the driving be-

haviour of the driver when starting a journey,

making a calculation of tiredness. This is con-

stantly compared with the current driving be-

haviour. If the system detects that the driver is

tired, an audible warning is given with a sound

and an optical warning is shown with a sym-

bol and supplementary message on the instru-

ment cluster screen ›››Fig.8. The message

on the instrument panel display is shown for

approximately 5 seconds, and depending on

the case, is repeated. The system stores the

last message displayed.

The warning on the instrument cluster display

can be hidden as follows:

●Press the button on the multifunction

steering wheel.

Conditions of operation

Driving behaviour is only calculated on speeds

above about 65 km/h (40 mph) up to around

200 km/h (125 mph).

Activating and deactivating

Fatigue detection can be activated or deac-

tivated in the infotainment system using the

function button > Assistants > Driver

alerts.

The driver alert system is always switched on

when the ignition is switched on ›››page35.

System limitations

The Fatigue detection has certain limitations

inherent to the system. The following condi-

tions can limit the Fatigue detection or prevent

it from functioning.

●At speeds below 60km/h (40mph).

●At speeds above 200 km/h (125 mph)

●When cornering

●In sections with roadworks.

●On roads in poor condition

●In unfavourable weather conditions

●When a sporty driving style is employed

●In the event of a serious distraction to the

driver

Fatigue detection will be restored when the

vehicle is stopped for more than 15 minutes,

when the ignition is switched o or when

the driver has unbuckled their seat belt and

opened the door.

In the event of slow driving during a long pe-

riod of time (below 60km/h, 40mph) the sys-

tem automatically re-establishes the tiredness

calculation. When driving at a faster speed the

driving behaviour will be recalculated.

WARNING

The smart technology of the driver alert sys-

tem cannot overcome the limits imposed by

the laws of physics and only works within

the limits of the system. Do not let the com-

fort aorded by the Fatigue detection system

tempt you into taking any risks when driving.

Take regular breaks, suicient in length when

making long journeys.

●The driver always assumes the responsibil-

ity of driving to their full capacity.

●Never drive if you are tired.

●The system does not detect the tiredness

of the driver in all circumstances. Consult

the information in the section ›››page24,

Conditions of operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2022 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info