Bedienungsanleitung Cupra Formentor - 2022 (Seite 228 von 396) (Englisch)

810366

228

Zoom out

Zoom in

Vorherige Seite

1/396

Nächste Seite

226

Parking and manoeuvring

●Due to the screen resolution or light con-

ditions, some items may be blurry or not dis-

played at all. Take care with thin posts, fen-

ces, railings or trees that might not be seen

on the screen and could damage the vehicle.

● The reverse assist has blind spots where

it cannot see people or objects. Monitor the

vehicle's surrounding area at all times.

● The system is not a replacement for driver

awareness. Supervise the parking manoeu-

vre and the vehicle's surrounding area at all

times.

● Do not be distracted from the traic by

looking at the screen.

● The images are only two-dimensional. Pro-

truding objects or holes in the road, for ex-

ample, are more diicult to detect or may not

be seen at all.

●Vehicle load modies the representation of

the guide lines. The width represented by the

lines decreases with vehicle load. Pay special

attention to the surroundings when the in-

side of the vehicle of the luggage compart-

ment are loaded.

●In the following situations, objects or other

vehicles appear to be further away or closer

than they actually are. Pay special attention:

–If moving from a at surface to a slope

and vice-versa.

–If the vehicle is heavily loaded.

–When the vehicle approaches objects

that are not on the ground surface or that

protrude from it. These objects may be

outside the camera angle when reversing.

Note

●It is important to take great care and pay

special attention if the driver is not familiar

with the system.

●The reverse assist reference lines disap-

pear when the rear lid is open.

Connecting and disconnecting

Connect the reverse assist

●Select reverse gear.

●OR: in the infotainment system select >

Assistants > Park assist.

Disconnect the reverse assist

●Drive forward at a speed of at least 15 km/h

(9 mph).

Shown on the display

The system’s functions and representations

may vary depending on the equipment.

The assistant's image view changes when the

factory-tted tow hitch is electronically con-

nected to a trailer ›››page288.

Reverse assist functions and symbols

When the reverse assist is connected, you can

make adjustments using the function buttons.

Some adjustments are equipment-dependent.

Exit the current display

Switch to angle parking ›››page227

Switch to the trailer hitching assistance

function

Switch to cross traic

Adjust the display: brightness, contrast

and colour.

Switch to park assist ›››page214

Display/hide the parking aid view

Guide lines

Green horizontal lines: extension of the vehi-

cle.

Yellow lines: vehicle path depending on the

steering angle.

Assistance function for hitching a trailer

On vehicles with a factory-tted towing device,

this function can be used to move the vehicle

close to a tow bar.

Auxiliary lines are shown in the infotainment

system.

Green lines: distance to the trailer hitch. The

distance between the lines is approx. 0.30 m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2022 Seite 228

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info