Bedienungsanleitung Cupra Formentor - 2022 (Seite 290 von 396) (Englisch)

810366

290

Zoom out

Zoom in

Vorherige Seite

1/396

Nächste Seite

288

Storing objects

Installing the bars

The crossbars are assembled on the roof

railings. The distance between crossbars

›››Fig.185 A should be between 70 and

90cm and the distance between the crossbars

and the brackets of the roof railings B must be

9cm.

WARNING

Incorrect attachment and use of the cross-

bars and the roof carrier system may cause

the whole system to detach from the roof

and cause an accident and injuries.

● Always take the manufacturer assembly in-

structions into account.

●Check threaded joints and attachments

travelling and if necessary tighten them after

you have travelled a short distance. When

making long trips, check the threaded joints

whenever you stop for a rest.

●Do not modify or repair the crossbars or

roof carrier system.

Note

Always read the assembly instructions that

come with the crossbars and the roof carrier

system carefully and keep them in the vehi-

cle.

Loading the roof carrier system

The load can only be secured if the crossbars

and the roof carrier system are properly instal-

led››› .

Maximum authorised cargo on the roof

The maximum permissible roof load is 75kg.

This gure comes from the combined weight

of the roof carrier, the cross bars and the load

itself on the roof ››› .

Always check the weight of the roof carrier sys-

tem, the cross bars and the weight of the load

to be transported and weigh them if necessary.

Never exceed the maximum authorised roof

load.

If you are using cross bars and a roof carrier

with a lower weight rating, you will not be able

to carry the maximum authorised roof load. In

this case, do not exceed the maximum weight

limit for the roof carrier which is listed in the

tting instructions.

Distributing a load

Distribute loads uniformly and secure them

correctly ››› .

Check attachments

Once the cross bars and roof carrier system

have been installed, check the bolted connec-

tions and attachments after a short journey

and subsequently with a certain frequency.

WARNING

● Never exceed the maximum authorised

load on the roof and on the axles or the vehi-

cle's maximum authorised weight.

●Never exceed the load capacity of the cross

bars and the roof carrier system, even if the

maximum authorised roof load has not been

reached.

●Secure heavy items as far forward as possi-

ble and distribute the vehicle load uniformly.

WARNING

If the load is loose or not secured, it could

fall from the roof carrier system or cause ac-

cidents and injuries.

●Always use belts or retaining straps that are

suitable and in a good condition.

Trailer mode

Introduction

Take into account country-specic regulations

about driving with a trailer and the use of a

towing bracket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2022 Seite 290

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info