Bedienungsanleitung Cyberhome CH-DVD500 (Seite 31 von 38) (Englisch)

498380

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Video Setup Options

SYSTEM - NTSC / PAL / P-SCAN

Your DVD Player will work with TVs based on the NTSC and PAL

standards, as well as TVs, Monitors and Projectors supporting the

new Progressive Scan mode.

NTSC is the standard TV system used in the USA, Canada, Japan

and many other countries, supporting 480 Lines at 60Hz. The PAL TV

system is used in Europe, Africa and the Middle East, among others,

and supports 576 Lines at 50Hz. P-SCAN, or Progressive Scan TVs

are able to scan a complete video frame on each pass, unlike normal

“interlaced” TVs that require two passes to scan each frame.

ASPECT - 4:3 PS / 4:3 LB / 16:9 WS

You can setup your DVD Player to work with normal and wide screen televisions. If you are using a wide screen TV,

set this option to 16:9 WS to match the aspect ratio of your TV. When used with a normal TV (4:3 aspect ratio), the

4:3 PS setting results in the typical “Pan & Scan” display, where a movie is clipped on the sides to fit on the TV

screen. The 4:3 LB setting will enable the “Letterbox” format, where the movie is presented in wide screen format

with black lines at the top and bottom of the screen.

OUTPUT - COMPOSITE / S-VIDEO / YCbCr

Change this setting to match the type of video input jack you are using on your TV. *If you are using a Progressive

Scan TV, you must change this setting FIRST, before the SYSTEM setting described above.

Composite Video is the most common video connection type and is supported on most TVs. S-Video is a higher

quality video signal that is separated into brightness and color channels. YCbCr, or COMPONENT video is used for

TVs, Computer Monitors and Projectors that support three video inputs, one for a color channel (Yellow, Blue, Red).

This setting is also used for Progressive Scan TVs.

LANG.

VIDEO

AUDIO

CHILD

OTHERS

EXIT

SYSTEM

ASPECT

OUTPUT

FORMAT

ENTER

RETURN SETUP

NTSC

4:3 PS

COMPOSITE

AUTO

FORMAT - AUTO / INTERLACED / PROGRESSIVE

Set the FORMAT according to the type of TV, Monitor or Projector you’re using. Most Televisions use INTERLACED

scanning, which “draws” every other horizontal scan line with each pass. PROGRESSIVE displays however, are able

to scan ALL lines (odd and even) in a single pass, resulting in a more “film-like” quality picture.

Normally, this setting should be set to AUTO, where the player will detect the scanning method used by your TV,

Monitor or Projector and adjust its output accordingly.

Quick Tips

Resetting to the Player’s Default Video Settings

Make sure to use caution when changing the SYSTEM and OUTPUT settings. If the value selected is not

compatible with your Television, you may no longer be able to see the screen. If this happens, follow the

procedures below to reset the player’s settings to default.



Turn the DVD Player off using the power switch on the back of the unit.



After a few seconds, power the player on and OPEN THE DISC TRAY.



Enter one of the following codes on the remote control depending on your TV type:

STOP - 2 - 0 - 0 - 2 STOP - 2 - 0 - 0 - 3



The player is now reset to COMPOSITE Video Out and the TV SYSTEM you specified.

NTSC (USA): PAL (Europe):

*If you are using a P-Scan TV, don’t change this setting until AFTER changing the OUTPUT setting discussed

below. If this happens, however, you’ll need to reset the player as outlined below. For details on setting up the player

with a Progress Scan TV, see pg 14.

For Help on Using the Setup Menu, see pg 29.

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cyberhome CH-DVD500 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info