Bedienungsanleitung Cyberhome CH-LDV 700B (Seite 32 von 35) (Englisch)

498382

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

DVD

AUDIO

DIGITAL OUTPUT SET

THE DVD PLAYER SETUP MENU

DIGITAL OUTPUT

Select the setting BITSTREAM or LPCM (Linear Pulse Code

Modulation) for each Audio format: DOLBY & MPEG. Select

48KHz or 96KHz sampling depending on your audio content.

Generally the 48KHz is better for most audio, and 96KHz is

reserved for super-high quality audio.

The DIGITAL OUTPUT setting enables or disables the

Optical Digital Output connector.

The AUDIO SETUP page

DOLBY

MPEG

PCM

DIGITAL OUTPUT

BACK

BITSTREAM

LPCM

LPCM 48KHz

EXIT

The DVD SETUP page

MENU, AUDIO, SUBTITLE LANGUAGE

Default setting: ENGLISH

Use these settings to set the player’s preferred language for

DVD Audio tracks, subtitles and menus.

ASPECT RATIO

Default setting: 16:9

This option is set to match the aspect ratio of the display,

monitor or TV used with the player. The default setting of 16:9

matches the aspect ratio of the player’s LCD display. Use this

setting for the LCD or when using the player to output to a

Widescreen TV. When using the player’s Video Output with a

“normal” TV (4:3 aspect ratio), the 4:3 PS (Pan & Scan)

setting or 4:3 LB (Letterbox) setting should be used,

depending on which video format is supported on the DVD

disc you are playing.

This setting should ALWAYS be set to 16:9 when using the



player’s built-in LCD Display.

To view DVDs marked as “FULL SCREEN” on the



player's LCD, DO NOT change this setting to 4:3. Instead,

change the LCD Mode to 4:3 Normal (See Page 10).

Bars on the top and bottom of the screen will be visible



when viewing “Anamorphic” widescreen movies.

DVD SETUP

AUDIO

SUBTITLE

ASPECT RATIO

ANGLE MARK

CLOSE CAPTIONS

PARENTAL CONTROL

NEW PASSWORD

DVD

ENGLISH

16:9

OFF

_ _ _ _

ANGLE MARK

Default setting: ON

When used with discs supporting multi-angle features, the

Angle Mark continuously displays the current angle you’re

viewing on screen. Setting ANGLE MARK to OFF will cancel

continuous display, and the current angle will be displayed on-

screen for just a few seconds after an angle change.

CLOSED CAPTIONS

Default setting: OFF

Not all discs support Closed Captions. However, setting

CLOSE CAPTION to ON will result in captions always being

displayed when discs supporting captions are used. If you don’t

wish to automatically enable captions, set this option to OFF.

PARENTAL CONTR

Default setting: 8

The Parental Lock allows you to limit the use of your DVD

Player to only those DVD discs that do not exceed the rating

you specify. When the Parental Control is set, DVD discs that

support this feature will play only after the password has been

entered. However, typically only discs produced by major

entertainment companies support Parental Control. You can

choose from eight levels of Parental Control, corresponding to

the standard rating system in the USA. You will need to enter a

valid password before making changes to Parental Control

settings - refer to the section below.

PASSWORD

To begin using the Parental Control, enter the factory password

of 3351. Once this password is entered, you will be able to

change the Parental Control setting or enter an additional user

password (the factory password cannot be deleted or changed).

To enter your own user password, key in a four digit number

into the NEW PASSWORD field. The user password and the

factory password can now both be used. You can change the

user password at any time after entering a valid password. The

user password is useful for allowing others - for example a

babysitter - temporary access to Parental Control settings.

Remember to keep in mind that the key to the Parental

Control feature is the factory default password of 3351.

Consequently, your player may not be secure if this manual

is accessible by your children.

Note on Parental Security

Don't confuse the ASPECT RATIO setting with the LCD

MODE (Page 10). The ASPECT RATIO setting is set to match

the LCD SCREEN, TV or MONITOR that the player is using

as a video output device. By default this is the player's built-

in LCD, which is 16:9 WIDESCREEN format.

The LCD MODE setting depends on the aspect ratio of the

MOVIE (DVD or SVCD/VCD). Since the player features a

WIDESCREEN LCD, the picture will appear stretched when

viewing non-widescreen material. Change the LCD MODE

(Page 10) to 4:3 NORMAL to simulate a normal TV screen

when viewing non-widescreen material. This includes "4:3",

"FULLSCREEN" or "PAN/SCAN" movie formats.

Note on Aspect Ratio

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cyberhome CH-LDV 700B Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info