Bedienungsanleitung Cybex Pallas B2-Fix (Seite 8 von 91) (Alle Sprachen)

768271

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

PRODUCT PARTS

(a) User Guide Storage Compartment

(b) Backrest

(d) Headrest Height Adjuster

(e) Booster

(f) Impact Shield

(g) Belt Guide Group 1

(h) Lap Belt Guide Group 2/3

(i) Shoulder Belt Guide

(j) Side Impact Protection

(k) ISOFIX Connect Locking Arms

(l) ISOFIX Connect Adjustment

Handle

(m) ISOFIX Connect Release Button

(n) ISOFIX Connect Safety Indicator

(o) ISOFIX Anchorage Points

INITIAL ASSEMBLY

Connect the backrest (b) to the booster (e) by hooking the guide lug on the

axis of the booster. The backrest (b) is then folded forward. Place the impact

shield (f) on the booster (e).

THE CORRECT POSITION IN THE VEHICLE

The child seat with retracted ISOFIX Connect locking arms (k) can be used on

all vehicle seats with automatic three-point safety belts approved in the vehicle

manual for “universal” use.



to the car through ISOFIX Connect locking arms (k). For this reason, ISOFIX

Connect can only be used in certain vehicles. Refer to the enclosed vehicle

type list for approved vehicles. You can obtain the most up-to-date version from

www.cybex-online.com.

In exceptional cases, the child car seat may also be used on the front

passenger seat. Always comply with the recommendations of the vehicle

manufacturer.

INSTALLING THE CHILD SEAT IN THE VEHICLE

1. Always ensure that…

• the backrests in the vehicle are locked in their upright position.

• when installing the child seat on the front passenger seat, adjust the vehicle

󰀨

2. Use the ISOFIX Connect adjustment handle (l) under the booster (e) and

pull the two ISOFIX Connect locking arms (k) to their furthest extent.

3. Now twist the ISOFIX Connect locking arms (k) 180° so that they are facing

the direction of the ISOFIX anchorage points (o).

4. Place the child seat on the appropriate seat in the car.

5. Push the two locking arms (k) into the ISOFIX anchorage points (o) until

these lock into place with an audible “CLICK”.

6. Use the ISOFIX Connect adjustment handle (l) and push the car seat

against the vehicle seat.

7. Ensure that the entire surface of the backrest of the child seat (b) is placed

against the backrest of the vehicle seat.

💡If the headrest of the vehicle is in the way, pull it upwards to its furthest

extent or remove it completely (except in rear-facing vehicle seats).

8. Ensure the seat is secure by trying to pull it out of the ISOFIX anchorage

points (o). The green safety indicators (n) must be clearly visible on both

sides of the seat.

9. In case the seat is used without ISOFIX connect, it can be stored away on

the bottom of the seat.

💡By using ISOFIX Connect, a connection to the vehicle is created which

increases your child’s safety. Your child still needs to be secured with the

three-point belt of the vehicle and the impact shield for Group 1.

REMOVING THE CHILD SEAT FROM THE VEHICLE

Perform the installation steps in the reverse order.

1. Unlock the ISOFIX Connect locking arms (k) on both sides by pushing

the release buttons (m) and pulling them back simultaneously.

2. Pull the seat away from the ISOFIX anchorage points (o).

3. Remove the child seat and store the ISOFIX Connect in reverse order

to installation.

ADJUSTING THE HEADREST

The headrest (c) can be adjusted by using the headrest height adjuster (d)

at the back of the headrest (c). Adjust the headrest so that max. 2 cm (approx.

(c).

💡The height of the headrest can still be adjusted while the seat is installed

in the car.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cybex Pallas B2-Fix Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info