Bedienungsanleitung Cybex Pallas G i-Size (Seite 9 von 120) (Alle Sprachen)

768274

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

!Do not use this car seat for more than 11 years. The car seat is exposed

to high stress during its product life span, which leads to changes in the

quality of the material with increasing age.

!The plastic parts can be cleaned with a mild cleaning agent and warm

water. Never use harsh cleaning agents or bleaches!

!On some vehicle seats made of sensitive materials, the use of car seats

may leave marks and/or cause discolouration. To prevent this, you can

place a blanket or towel or similar underneath the car seat to protect the

vehicle seat.

PRODUCT PARTS

(a) Backrest

(b) Adjustable Headrest

(d) Headrest Height Adjuster

(e) Shoulder Belt Guide

(100 cm – 150 cm)

(f) Linear Side-impact Protection

(L.S.P.)

(g) Impact Shield (76 cm – 105 cm)

(h) Buckles of the Impact Shield

(i) Tongues of the Impact Shield

(j) Belt Adjuster Release Button

(k) Belt Adjuster

(l) Belt

(m) Lap Belt Guide (100 cm – 150 cm)

(n) ISOFIX Locking Arms

(o) ISOFIX Anchorage Points

(p) ISOFIX Release Buttons

(q) ISOFIX Safety Indicator

(r) User Guide Storage Compartment

(s) Top Tether Belt

(t) Top Tether Parking Position

(u) Top Tether Adjuster

(v) Side Impact Protection Release

Button

(w) Position Adjustment Button

(x) Top Tether Safety Indicator

(y) Reclining Headrest

(z) Top Tether Adjustment button

THE CORRECT POSITION IN THE VEHICLE

76 cm – 105 cm; > 15 m with impact shield

This is an i-Size Enhanced Child Restraint System. It is approved according

to UN Regulation No. R129/03, for use in i-Size compatible vehicle seating

positions as indicated by vehicle manufacturers in their vehicle user manuals.

If your vehicle does not have an i-Size seating position, please check the

enclosed vehicle type list. You can obtain the most up-to-date version from

www.cybex-online.com.

100 cm – 150 cm; with automatic three-point belt

The car seat can be used on vehicle seats which are equipped with an

automatic three-point belt. Refer to the enclosed vehicle type list for approved

vehicles. You can obtain the most up-to-date version from

www.cybex-online.com.

For the use with three-point belt between the height range 100 cm – 150 cm

there is the possibility of usage without ISOFIX and Top Tether. In this case,

the car seat must always be secured with the three-point belt even when there

is no child in the seat.

In exceptional cases, the car seat may also be used on the front passenger seat.

Always comply with the recommendations of the vehicle manufacturer.

💡Above a child’s height of 135 cm, the compatibility between the

Pallas G i-Size and your vehicle might be reduced.

INSTALLING THE CAR SEAT IN THE VEHICLE

1. Always ensure that…

• the backrests in the vehicle are locked in their upright position.

• when installing the car seat on the front passenger seat, adjust the vehicle

󰀨

2. Detach the Top Tether Belt (s) from the Top Tether Parking Position (t).

3. Before installation, make sure that the car seat is in the seating position.

4. Release the ISOFIX Release Buttons (p) to extend the ISOFIX Locking Arms (n).

💡The ISOFIX Release Buttons can both be released independently allowing

the ISOFIX Locking Arms to be adjusted independently.

5. Push the ISOFIX Locking Arms (n) out of the base to their furthest extent.

6. Place the car seat on an appropriate seat in the car.

7. Push the ISOFIX Locking Arms (n) into the ISOFIX Anchorage Points (o)

until these lock into place with an audible "CLICK". The two ISOFIX Safety

Indicators (q) will switch from red to green.

8. Ensure the seat is secure by trying to pull it out of the ISOFIX Anchorage

Points (o).

9. Push the car seat towards the backrest of the vehicle seat until it is fully

aligned with the backrest.

💡If the headrest of the vehicle is in the way, pull it upwards to its furthest

extent or remove it completely (except in rear-facing vehicle seats).

10. Guide the Top Tether Belt (s) straight across the vehicle seat and anchor it

using the snap hook on the anchor point of your vehicle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cybex Pallas G i-Size Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info