D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective
owners. Product specications, size and shape are subject to change without notice, and actual product appearance may dier from
that depicted on the packaging. Visit www.dlink.com for more details. Maximum throughput based on theoretical transmission PHY rate.
Actual date throughput will vary. Network conditions and environmental factors, including volume of trac and network overhead, may
lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may
adversely aect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer
switch, short wave radios, or other powerline devices that do not follow the HomePlug AV and IEEE1901 standard.
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States
Internet: http://support.dlink.com
Canada
Internet: http://support.dlink.ca
1Power LED
• Solid: The device is receiving electrical power.
• Blinking: The device is powering up or in power
saving mode.
• O: The device is not receiving electrical power.
2PowerLine LED
• Solid: The device is connected to a Powerline
network.
• O: The device has not found any other
compatible Powerline devices using the same
encryption key.
The color indicates the Powerline link rate:
• Green: The Powerline link rate is best.
• Amber: The Powerline link rate is better.
• Red: The Powerline link rate is good.
3Ethernet LED
• Solid: The Ethernet port is linked.
• O: There is no Ethernet connection.
4
Simple Connect
Button/Reset Button
Press and hold the button for two seconds to
secure your network or hold the button for 10
seconds to reset to the factory default settings.
5Gigabit Ethernet Port
Connect to a 10/100/1000 Ethernet device such
as a router, computer, gaming console, network
storage unit, or a media player.
1
2
3
1
Plug in one of the DHP-600AV adapters and connect to your
router with an Ethernet cable. The Power and Ethernet LEDs
should both light up.
2
Plug in the other DHP-600AV adapter in the room that you want
to extend your network. The Power LED will turn on.
3
Verify that the PowerLine LEDs on both adapters are lit. If they
are, the adapters are connected. If not, try another outlet.
DHP-600AV
DHP-600AV
DHP-600AV
4
5V
2.5A
USB
WPS
1
2
3
4
INTERNET
POWER
DHP-600AV
Router
Internet
DHP-600AV
5
4
You can now connect another device using an Ethernet cable
to the DHP-600AV adapter. Verify that the Ethernet LED is lit.
Your installation is completed.
Package Contents
Hardware OverviewRecommendations
Installation
Contact Technical Support
5
To secure your network, press the Simple Connect button (on
the bottom) for two seconds on one of the adapters. The Power
LED will start to blink. Then, within two minutes, press the
Simple Connect button on the other adapter for two seconds.
Once the Power LEDs stop blinking, verify that the PowerLine
LED is lit on both adapters (as in Step 3). This indicates that your
adapters are properly connected to each other.
DHP-600AV
DHP-600AV
DHP-600AVDHP-600AV
Simple Connect ButtonSimple Connect Button
Brauchen Sie Hilfe? Stellen Sie Ihre Frage.
Missbrauch melden von Frage und/oder Antwort
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für D-Link DHP-601AV wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.