Bedienungsanleitung D-Link DWL-3600AP (Seite 115 von 136) (Englisch)

728138

115

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 115

October 2017

Section 9 - Clustering Multiple APs

Stopping/Starting Automatic Channel Assignment

By default, automatic channel assignment is disabled (off).

Note: Channel Management overrides the default cluster behavior, which is to synchronize radio

channels of all APs across a cluster. When Channel Management is enabled, the radio Channel is

not synced across the cluster to other APs.

•) Click Start to resume automatic channel assignment.

When automatic channel assignment is enabled, the Channel Manager periodically maps radio channels used

by clustered access points and, if necessary, re-assigns channels on clustered APs to reduce interference (with

cluster members or other APs outside the cluster).

•) Click Stop to stop automatic channel assignment. (No channel usage maps or channel re-assignments will be

made. Only manual updates will affect the channel assignment.)

Viewing Current Channel Assignments and Setting Locks

The Current Channel Assignments section shows a list of all access points in the cluster by IP Address. The display

shows the band on which each AP is broadcasting (a/b/g/n), the current channel used by each AP, and an option to

lock an AP on its current radio channel so that it cannot be re-assigned to another.

The following table provides details about Current Channel Assignments.

Field Description

IP Address Species the IP Address for the access point.

Radio Identies the MAC address of the radio.

Band Indicates the band on which the access point is broadcasting.

Current Indicates the radio Channel on which this access point is currently broadcasting.

Status Shows whether the radio is up (on) or down (off).

Locked Click Locked to force the access point to remain on the current channel.

When Locked is selected (enabled) for an access point, automated channel management

plans will not re-assign the AP to a different channel as a part of the optimization strategy.

Instead, APs with locked channels will be factored in as requirements for the plan.

If you click Apply, you will see that locked APs show the same channel for the Current

Channel and Proposed Channel elds. Locked APs will keep their current channels.

Table 68 - Channel Assignments

Viewing the Last Proposed Set of Changes

The Proposed Channel Assignments shows the last channel plan. The plan lists all access points in the cluster by IP

Address, and shows the current and proposed channels for each AP. Locked channels will not be re-assigned and the

optimization of channel distribution among APs will take into account the fact that locked APs must remain on their

current channels. APs that are not locked may be assigned to different channels than they were previously using,

depending on the results of the plan.

Field Description

IP Address Species the IP Address for the access point.

Radio Indicates the radio channel on which this access point is currently broadcasting.

Proposed Channel Indicates the radio channel to which this access point would be re-assigned if the Channel

Plan is executed.

Table 69 - Last Proposed Changes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-3600AP Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info