Bedienungsanleitung D-Link DWL-3610AP (Seite 16 von 136) (Englisch)

728139

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 16

October 2017

Section 2 - Getting Started

8.) If your network uses IEEE 802.1X port security for network access control, you must congure the 802.1X

supplicant information on the AP.

For information about how to congure the 802.1X user name and password, see “Conguring IEEE 802.1X

Authentication” on page 19.

Basic Settings

From the Basic Settings page, you can view various information about the UAP, including IP and MAC address

information, and congure the administrator password for the UAP. The following table describes the elds and

conguration options on the Basic Settings page.

Field Description

IP Address Shows the IP address assigned to the AP. This eld is not editable on this page because

the IP address is already assigned (either by DHCP, or statically through the Ethernet

Settings page).

IPv6 Address Shows the IPv6 address assigned to the AP. This eld is not editable on this page because

the IP address is already assigned (either by DHCPv6, or statically through the Ethernet

Settings page).

IPv6 Address Status Shows the operational status of the static IPv6 address assigned to the management

interface of the AP. The possible values are Operational and Tentative.

IPv6 Auto-

congured Global

Addresses

Shows each automatically-congured global IPv6 address for the management interface of

the AP.

IPv6 Link Local

Address

Shows the IPv6 Link Local address, which is the IPv6 address used by the local physical

link. The link local address is not congurable and is assigned by using the IPv6 Neighbor

Discovery process.

MAC Address Shows the MAC address of the AP. The address shown here is the MAC address

associated with the management interface. This is the address by which the AP is known

externally to other networks.

Firmware Version Shows version information about the rmware currently installed on the AP. As new

versions of the WLAN AP rmware become available, you can upgrade the rmware on

your APs.

Model Displays the AP model number.

Product Identier Identies the AP hardware model.

Hardware Version Identies the AP hardware version.

Serial Number Shows the AP serial number.

Device Name Generic name to identify the type of hardware.

Device Description Provides information about the product hardware.

New Password Enter a new administrator password. The characters you enter are displayed as bullet

characters to prevent others from seeing your password as you type.

The administrator password must be an alphanumeric string of up to 32 characters. The

special characters are also supported.

Note: As an immediate rst step in securing your wireless network, we recommend that

you change the administrator password from the default.

Conrm New

Password

Re-enter the new administrator password to conrm that you typed it as intended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-3610AP Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info