Bedienungsanleitung D-Link DWL-6620APS (Seite 46 von 136) (Englisch)

728147

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 46

October 2017

Section 4 - Managing the Access Point

Field Description

MCS (Data Rate)

Settings (802.11n

modes only)

This eld shows the Modulation and Coding Scheme (MCS) index values supported by the

radio. Each index can be enabled and disabled independently.

Broadcast/Multicast

Rate Limiting

Enabling multicast and broadcast rate limiting can improve overall network performance by

limiting the number of packets transmitted across the network.

By default the Multicast/Broadcast Rate Limiting option is disabled. Until you enable

Multicast/Broadcast Rate Limiting, the following elds will be disabled:

•) Rate Limit - Enter the rate limit you want to set for multicast and broadcast trafc. The

limit should be greater than 1, but less than 50 packets per second. Any trafc that

falls below this rate limit will always conform and be transmitted to the appropriate

destination. The default and maximum rate limit setting is 50 packets per second.

•) Rate Limit Burst - Setting a rate limit burst determines how much trafc bursts can

be before all trafc exceeds the rate limit. This burst limit allows intermittent bursts of

trafc on a network above the set rate limit. The default and maximum rate limit burst

setting is 75 packets per second.

DHCP Offer/ACK to

Unicast

Enabling this feature will convert BOOTP replies from DHCP server to Unicast and send to

the requesting wireless client.

Multicast to Unicast Enabling this feature will convert all multicast data stream to unicast stream and send to the

associated wireless clients.

Forced Roaming Enabling this feature will detect and disconnect wireless clients based on the client RSSI. If

the client RSSI falls below the roaming threshold value, the client will be disassociated.

Further association attempts will be monitored and disconnected 3 times if its RSSI is below

the threshold value. If still the client tries association 4th time, the association will be logged

and allowed to connect.

TSPEC Mode Regulates the overall TSPEC mode on the AP. The options are:

•) On — The AP handles TSPEC requests according to the TSPEC settings you

congure on the Radio page. Use this setting if the AP handles trafc from QoS-

capable devices, such as a Wi-Fi CERTIFIED phone.

•) Off — The AP ignores TSPEC requests from client stations. Use this setting if you do

not want to use TSPEC to give QoS-capable devices priority for time-sensitive trafc.

TSPEC Voice ACM

Mode

Regulates mandatory admission control (ACM) for the voice access category. The options

are:

•) On — A station is required to send a TSPEC request for bandwidth to the AP before

sending or receiving a voice trafc stream. The AP responds with the result of the

request, which includes the allotted medium time if the TSPEC was admitted.

•) Off — A station can send and receive voice priority trafc without requiring an admitted

TSPEC; the AP ignores voice TSPEC requests from client stations.

TSPEC Voice ACM

Limit

Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless

medium using a voice AC to gain access.

TSPEC Video ACM

Mode

Regulates mandatory admission control for the video access category. The options are:

•) On — A station is required to send a TSPEC request for bandwidth to the AP before

sending or receiving a video trafc stream. The AP responds with the result of the

request, which includes the allotted medium time if the TSPEC was admitted.

•) Off — A station can send and receive video priority trafc without requiring an admitted

TSPEC; the AP ignores video TSPEC requests from client stations.

TSPEC Video ACM

Limit

Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless

medium using a video AC to gain access.

TSPEC BE ACM

Mode

Regulates mandatory admission control for the best effort access category. The options are:

• On-A station is required to send a TSPEC request for bandwidth to the AP before

sending or receiving a best effort trafc stream. The AP responds with the result of the

request, which includes the allotted medium time if the TSPEC was admitted.

• Off-A station can send and receive best effort priority trafc without requiring an admitted

TSPEC; the AP ignores best effort TSPEC requests from client stations.

TSPEC BE ACM

Limit

Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless

medium using a best effort AC for stations roamed to this AP using Fast BSS Transition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-6620APS Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von D-Link DWL-6620APS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info