Bedienungsanleitung D-Link DWL-6620APS (Seite 100 von 136) (Englisch)

728147

100

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 100

October 2017

Section 8 - Conguring Client Quality of Service (QoS)

Field Description

EtherType Select the EtherType eld to compare the match criteria against the value in the header of

an Ethernet frame.

Select an EtherType keyword or enter an EtherType value to specify the match criteria.

Select from List Select

Select one of the following protocol types:

•) appletalk

•) arp

•) ipv4

•) ipv6

•) ipx

•) netbios

•) pppoe

Match to Value

Enter a custom protocol identier to which packets are matched. The value is a four-digit

hexadecimal number in the range of 0600 – FFFF.

Class of Service Select this eld and enter an 802.1p user priority to compare against an Ethernet frame.

The valid range is 0 – 7. This eld is located in the rst/only 802.1Q VLAN tag.

Source MAC

Address

Select this eld and enter the source MAC address to compare against an Ethernet frame.

Source MAC Mask Select this eld and enter the source MAC address mask specifying which bits in the source

MAC to compare against an Ethernet frame.

A 0 indicates that the address bit is signicant, and an f indicates that the address bit is to be

ignored. A MAC mask of 00:00:00:00:00:00 matches a single MAC address.

Destination MAC

Address

Select this eld and enter the destination MAC address to compare against an Ethernet

frame.

Destination MAC

Mask

Enter the destination MAC address mask specifying which bits in the destination MAC to

compare against an Ethernet frame.

A 0 indicates that the address bit is signicant, and an f indicates that the address bit is to be

ignored. A MAC mask of 00:00:00:00:00:00 matches a single MAC address.

VLAN ID Select this eld and enter the VLAN IDs to compare against an Ethernet frame.

This eld is located in the rst/only 802.1Q VLAN tag.

Table 58 - ACL Conguration

After you set the desired rule criteria, click Apply. To delete an ACL, select the Delete ACL option and click Apply.

Creating a DiffServ Class Map

The Client QoS feature contains Differentiated Services (DiffServ) support that allows trafc to be classied into

streams and given certain QoS treatment in accordance with dened per-hop behaviours.

Standard IP-based networks are designed to provide best effort data delivery service. Best effort service implies that

the network delivers the data in a timely fashion, although there is no guarantee that it will. During times of congestion,

packets may be delayed, sent sporadically, or dropped. For typical Internet applications, such as e-mail and le

transfer, a slight degradation in service is acceptable and in many cases unnoticeable. However, on applications with

strict timing requirements, such as voice or multimedia, any degradation of service has undesirable effects.

By classifying the trafc and creating policies that dene how to handle these trafc classes, you can make sure that

time-sensitive trafc is given precedence over other trafc.

The UAP supports up to 50 Class Maps.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-6620APS Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von D-Link DWL-6620APS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info