Bedienungsanleitung D-Link DWL-6620APS (Seite 106 von 136) (Englisch)

728147

106

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 106

October 2017

Section 8 - Conguring Client Quality of Service (QoS)

Field Description

Drop Select Drop to specify that all packets for the associated trafc stream are to be dropped if

the class map criteria is met.

Mark Class of

Service

Select this eld to mark all packets for the associated trafc stream with the specied class

of service value in the priority eld of the 802.1p header. If the packet does not already

contain this header, one is inserted. The CoS value is an integer from 0 – 7.

Mark IP DSCP Select this eld to mark all packets for the associated trafc stream with the IP DSCP value

you select from the list or specify.

Select from List

Select from a list of DSCP types.

Match to Value

Enter a DSCP Value to match (0 – 63).

Mark IP Precedence Select this eld to mark all packets for the associated trafc stream with the specied IP

Precedence value. The IP Precedence value is an integer from 0 – 7.

Disassociate Class

Map

Select this option and click Apply to remove the class selected in the Class Map Name

menu from the policy selected in the Policy Map Name menu.

Member Classes Lists all DiffServ classes currently dened as members of the selected policy. If no class is

associated with the policy, the eld is empty.

Delete Policy Map Select this eld to delete the policy map showing in the Policy Map Name menu.

Table 60 - DiffServ Policy Map

To delete a Policy Map, select the Delete Policy Map option and click Apply.

Client QoS Status

The Client QoS Status page shows the client QoS settings that are applied to each client currently associated with

the AP.

To view QoS settings for an associated client, click the Client QoS Status tab.

Figure 68 - QoS Conguration Status For Associated Clients

Field Description

Station The Station menu contains the MAC address of each client currently associated with the AP.

To view the QoS settings applied to a client, select its MAC address from the list.

Global QoS Mode Shows the current Client QoS Global Admin Mode on the AP.

Client QoS Mode Shows whether the QOS mode for the selected client is enabled or disabled.

Note: For the Qos Mode to be enabled on a client, it must be globally enabled on the AP

and enabled on the VAP the client is associated with. Use the VAP QoS Parameters page

to enable the QoS Global Admin mode and the per-VAP QoS Mode.

Bandwidth Limit Up Shows the maximum allowed transmission rate from the client to the AP in bits per second

(bps). The valid range is 0 – 4294967295 bps.

Bandwidth Limit

Down

Shows the maximum allowed transmission rate from the AP to the client in bits per second

(bps). The valid range is 0 – 4294967295 bps.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-6620APS Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von D-Link DWL-6620APS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info