Bedienungsanleitung D-Link DWL-6620APS (Seite 116 von 136) (Englisch)

728147

116

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 116

October 2017

Section 9 - Clustering Multiple APs

Conguring Advanced Settings

The advanced settings allow you to customize and schedule the channel plan for the cluster. If you use Channel

Management as provided (without updating Advanced Settings), channels are automatically ne-tuned once every

hour if interference can be reduced by 25 percent or more. Channels will be re-assigned even if the network is busy.

The appropriate channel sets will be used (b/g for APs using IEEE 802.11b/g and a for APs using IEEE 802.11a).

The default settings are designed to satisfy most scenarios where you would need to implement channel

management.

Use Advanced Settings to modify the interference reduction potential that triggers channel re-assignment, change

the schedule for automatic updates, and re-congure the channel set used for assignments. If there are no elds

showing in the Advanced section, click the toggle button to display the settings that modify timing and details of the

channel planning algorithm.

Field Description

Change channels

if interference is

reduced by at least

Specify the minimum percentage of interference reduction a proposed plan must achieve in

order to be applied. The default is 75 percent.

Use the drop-down menu to choose percentages ranging from 5 percent to 75 percent.

This setting lets you set a gating factor for channel re-assignment so that the network is not

continually disrupted for minimal gains in efciency.

For example, if channel interference must be reduced by 75 percent and the proposed

channel assignments will only reduce interference by 30 percent, then channels will not be

re-assigned. However; if you re-set the minimal channel interference benet to 25 percent

and click Apply, the proposed channel plan will be implemented and channels re-assigned

as needed.

Determine if there

is better set of

channels every

Use the drop-down menu to specify the schedule for automated updates.

A range of intervals is provided, from 30 Minutes to 6 Months

The default is 1 Hour (channel usage re-assessed and the resulting channel plan applied

every hour).

Table 70 - Advanced Channel Management Settings

Click Apply under Advanced settings to apply these settings.

Advanced settings will take effect when they are applied and inuence how automatic channel management is

performed.

Channel Management supports Clustering Options, Single IP Management, and Secure Join Clustering. For

more details, please refer to the following sections: “Cluster Options” on page 111, “Single IP Management” on page

111, and “Secure Join Clustering” on page 111.

Note: Currently, Clustering Options, Single IP Management, and Secure Join Clustering features

are available only in DWL-3610AP and DWL-6610B1AP.

Viewing Wireless Neighbourhood Information

The Wireless Neighbourhood shows up to 20 access points per radio within range of every member of the cluster,

shows which access points are within range of which cluster members, and distinguishes between cluster members

and non-members.

Note: The Wireless Neighbourhood page shows up to 20 access points per radio. To see all the

access points detected on a given cluster access point, navigate to that cluster member’s web

interface and go to the Status > Neighbouring Access Points page.

For each neighbour access point, the Wireless Neighbourhood view shows identifying information (SSID or Network

Name, IP Address, MAC address) along with radio statistics (signal strength, channel, beacon interval). You can click

on an AP to get additional statistics about the APs in radio range of the currently selected AP.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-6620APS Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von D-Link DWL-6620APS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info