728147
4
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
4 D-Link DWL-6620APS Quick Install Guide
ENGLISH
4. Plug the CAT 5 cable into the LAN port on
the access point.
Mounting Using Anchor Screws
1. Place the plastic wall mounting ring on a
wall or ceiling. Mark the points where you
will insert the screws, then remove the
mounting ring.
Installation
Mounting Options
You can mount the DWL-6620APS access
point on any of the following types of surfaces:
• Solid surface wall or ceiling
• Tabletop
Cable Requirement
Use a CAT 5 cable with an even sheath.
The Ethernet ports on the DWL-6620APS
access point cannot accept a CAT 5 cable that
has an uneven sheath; the RJ-45 connector
on the cable will not fit properly into the
receptacle on the access point.
Wall Installation Recommendations
If you plan to install the DWL-6620APS on a
wall or other vertical surfaces, orient the top
of the access point (the side with the LEDs)
toward the intended coverage area. The
radio antennas transmit through the top of
the access point but not through the bottom
(where the bracket is).
Warning: The DWL-6620APS is designed
to receive PoE power only from an 802.3at-
compliant source, or from a D-Link-approved
power adapter. Connecting an access point
to a Power over Ethernet (PoE) device that
is not approved by D-Link can damage the
equipment.
2. Drill holes in the marked points and
insert the plastic wall anchors.
3. Use the supplied screws to attach the
mounting ring to the wall.
Warning: This product is to be connected
only to PoE networks without routing to the
outside plant. The equipment power cord
must be connected to a socket-outlet earthling
connection.
Avertissement: Le DWL-6620APS est
concu pour recevoir de l’alimentation PoE
uniquement a partir d’une source compatible
802.3at ou d’un adaptateur secteur approuve
par D-Link. La connexion d’un point d’acces
a un peripherique Power over Ethernet(PoE)
non approuve par D-Link peut endommager
l’equipement.
Avertissement: Ce produit doit etre connecte
uniquement aux reseaux PoE sans
acheminement vers l’installation externe. Le
cordon d’alimentation de l’equipement doit
etre branche sur une prise de terre avec prise
de courant.
Manage the access point from the
computer via the Unied Wireless
Switch or Wireless Controller: Connect
the access point to a Unied Wireless
Switch or Wireless Controller. Connect
your computer to the same network as
that of the Unied Wireless Switch or
Wireless Controller. Log in to the Unied
Wireless Switch web administration page
or Wireless Controller web administration
page. For the default login information
please see Unied Wireless Switch
user manual or Wireless Controller user
manual.
Unied Wireless
Switch
or
Wireless Controller
Computer
DWL-6620APS
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für D-Link DWL-6620APS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von D-Link DWL-6620APS

D-Link DWL-6620APS Bedienungsanleitung - Englisch - 136 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info