Bedienungsanleitung D-Link DWL-8710AP (Seite 17 von 136) (Englisch)

728146

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 17

October 2017

Section 2 - Getting Started

Field Description

Baud Rate Select a baud rate for the serial port connection. The baud rate on the AP must match the

baud rate on the terminal or terminal emulator to connect to the AP command-line interface

(CLI) by using a serial (console) connection.

The following baud rates are available:

•) 9600

•) 19200

•) 38400

•) 57600

•) 115200

System Name Enter a name for the AP. This name appears only on the Basic Settings page and is a

name to identify the AP to the administrator. Use up to 64 alphanumeric characters, for

example My AP.

System Contact Enter the name, e-mail address, or phone number of the person to contact regarding

issues related to the AP.

System Location Enter the physical location of the AP, for example Conference Room A.

Table 4 - Basic Settings Page

Connecting to the AP Web Interface by Using the IPv6 Address

To connect to the AP by using the IPv6 global address or IPv6 link local address, you must enter the AP address into

your browser in a special format.

Note: The following instructions and examples work with Microsoft Internet Explorer 7 (IE7) and

might not work with other browsers. For DWL-3610AP and DWL-6610B1AP, it will work with

Microsoft Internet Explorer 8 (IE8).

To connect to an IPv6 global address, add square brackets around the IPv6 address. For example, if the AP

global IPv6 address is 2520::230:abff:fe00:2420, type the following address into the IE7 address eld: http://

[2520::230:abff:fe00:2420].

To connect to the iPv6 link local address, replace the colons (:) with hyphens (-), add the interface number preceded

with an “s,” then add “.ipv6-literal.net.” For example, if the AP link local address is fe80::230:abff:fe00:2420, and the

Windows interface is dened as “%6,” type the following address into the IE7 address eld: http://fe80--230-abff-fe00-

2420s6.ipv6-literal.net.

Using the CLI to View the IP Address

The DHCP client on the UAP is enabled by default. If you connect the UAP to a network with a DHCP server, the

AP automatically acquires an IP address. To manage the UAP by using the Administrator UI, you must enter the IP

address of the access point into a Web browser.

If a DHCP server on your network assigns an IP address to the UAP, and you do not know the IP address, use the

following steps to view the IP address of the UAP:

1.) Using a null-modem cable, connect a VT100/ANSI terminal or a workstation to the console (serial) port.

If you attached a PC, Apple, or UNIX workstation, start a terminal-emulation program, such as HyperTerminal or

TeraTerm.

2.) Congure the terminal-emulation program to use the following settings:

•) Baud rate: 115200 bps

•) Data bits: 8

•) Parity: none

•) Stop bit: 1

•) Flow control: none

3.) Press the return key, and a login prompt should appear.

The login name is admin. The default password is admin. After a successful login, the screen shows the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info