Bedienungsanleitung D-Link DWL-8710AP (Seite 47 von 136) (Englisch)

728146

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 47

October 2017

Section 4 - Managing the Access Point

Field Description

TSPEC BK ACM

Mode

Regulates mandatory admission control for the background access category. The options

are:

• On-A station is required to send a TSPEC request for bandwidth to the AP before

sending or receiving a background trafc stream. The AP responds with the result of the

request, which includes the allotted medium time if the TSPEC was admitted.

• Off-A station can send and receive background priority trafc without requiring an

admitted TSPEC; the AP ignores background TSPEC requests from client stations.

TSPEC BK ACM

Limit

Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless

medium using a background AC for stations roamed to this AP using Fast BSS Transition.

TSPEC AP Inactivity

Timeout

Specify the amount of time for an AP to detect an downlink TS as idle before deleting it.

TSPEC Station

Inactivity Timeout

Specify the amount of time for an AP to detect an uplink TS as idle before deleting it.

TSPEC Legacy

WMM Queue Map

Mode

Select Enable to allow intermixing of legacy trafc on queues operating as ACM.

Vht Features The purpose of this feature is to enable/disable Broadcom specic extensions in VHT for

Broadcom-to-Broadcom links. VHT feature enables support for 256QAM VHT rates not

specied by the 802.11ac Draft. The rates are all VHT LDPC mode, MCS 9 Nss 1 20Mhz,

MCS 9 Nss 2 20Mhz, MCS 6 Nss 3 80Mhz. The vht feature is supported for 802.11ac phy.

Olpc Calibration

Period

The purpose of this is to set Olpc Calibration Period which triggers a periodic calibration to

maintain output power same as target power for low power channels. The range of Olpc

Calibration Period is 10 to 20 minutes and ‘0’ is to disable the periodic calibration. This is

supported on 43431, 43460, and 43520 Radios.

Airtime Fairness The purpose of this is to enable/disable Airtime Fairness. This feature addresses the issue

of slower data transfers throttling the higher speed ones.

Table 21 - Radio Settings

Note: It is recommended not to require Admission Control for the access categories BE (Best

Effort) and BK (Background). Changing some settings might cause the AP to stop and restart

system processes. If this happens, wireless clients will temporarily lose connectivity. We

recommend that you change AP settings when WLAN trafc is low.

Note: The following features are available only in DWL-3610AP and DWL-6610B1AP: DFS

Support, Frame-burst Support, DHCP Offer/ACK to Unicast, Multicast to Unicast, Forced Roaming,

TSPEC BE ACM Mode, TSPEC BE ACM Limit, TSPEC BK ACM Mode, TSPEC BK ACM Limit,

Vht Features, Olpc Calibration Period, and Airtime Fairness.

Use the Radio page to congure both Radio One and Radio Two. The settings on the page apply only to the radio

that you choose from the Radio drop-down list. After you congure settings for one of the radios, click Apply and then

select and congure the other radio. Be sure to click Apply to apply the second set of conguration settings for the

other radio.

Conguring Radio and VAP Scheduler

The Radio and VAP scheduler is a standalone DWL-x600AP feature. To congure the Radio and VAP scheduler,

select the Scheduler tab in the Manage section. The Radio and VAP Scheduler allows you to congure a rule with a

specic time interval for VAPs or radios to be operational, thereby automating the enabling or disabling of the VAPs

and Radios.

One of the ways you can use this feature is to schedule radios to operate only during the ofce working hours in order

to achieve security and reduce power consumption. You can also use the Scheduler to allow access to VAPs for

wireless clients only during specic times of day.

Each rule species the start time, end time and day (or days) of the week the radio or VAP can be operational. The

rules are periodic in nature and are repeated every week.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info