Bedienungsanleitung D-Link DWL-8710AP (Seite 62 von 136) (Englisch)

728146

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 62

October 2017

Section 4 - Managing the Access Point

If you select None as your preferred WDS encryption option, you will not be asked to ll in any more elds on the

WDS page. All data transferred between the two APs on the WDS link will be unencrypted.

Note: To disable a WDS link, you must remove the value congured in the Remote Address eld.

WEP on WDS Links

The following table describes the additional elds that appear when you select WEP as the encryption type.

Field Description

Encryption WEP

WEP Select this option if you want to set WEP encryption on the WDS link.

Key Length If WEP is enabled, specify the length of the WEP key:

•) 64 bits

•) 128 bits

Key Type If WEP is enabled, specify the WEP key type:

•) ASCII

•) Hex

Characters

Required

Indicates the number of characters required in the WEP key.

The number of characters required updates automatically based on how you set Key Length

and Key Type.

WEP Key Enter a string of characters. If you selected ASCII, enter any combination of 0 – 9, a – z, and

A – Z. If you selected HEX, enter hexadecimal digits (any combination of 0 – 9 and a – f or

A – F). These are the RC4 encryption keys shared with the stations using the AP.

Table 31 - WEP on WDS Links

WPA/PSK on WDS Links

The following table describes the additional elds that appear when you select WPA/PSK as the encryption type.

Note: In order to congure WPA-PSK on any WDS link, VAP0 of the selected radio must be

congured for WPA-PSK or WPA-Enterprise.

Field Description

Encryption WPA (PSK)

SSID Enter an appropriate name for the new WDS link you have created. This SSID should be

different from the other SSIDs used by this AP. However, it is important that the same SSID

is also entered at the other end of the WDS link. If this SSID is not the same for both APs on

the WDS link, they will not be able to communicate and exchange data.

The SSID can be any alphanumeric combination.

Key Enter a unique shared key for the WDS bridge. This unique shared key must also be

entered for the AP at the other end of the WDS link. If this key is not the same for both APs,

they will not be able to communicate and exchange data.

The WPA-PSK key is a string of at least 8 characters to a maximum of 63 characters.

Acceptable characters include upper and lower case alphabetic letters, the numeric digits,

and special symbols such as @ and #.

Table 32 - WPA/PSK on WDS Links

Note: After you congure the WDS settings, you must click Apply to apply the changes and

to save the settings. Changing some settings might cause the AP to stop and restart system

processes. If this happens, wireless clients will temporarily lose connectivity. We recommend that

you change AP settings when WLAN trafc is low.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info