Bedienungsanleitung D-Link DWL-8710AP (Seite 107 von 136) (Englisch)

728146

107

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 107

October 2017

Section 8 - Conguring Client Quality of Service (QoS)

Field Description

ACL Type Up Shows the type of ACL that is applied to trafc in the inbound (client-to-AP) direction, which

can be one of the following:

•) IPv4: The ACL examines IPv4 packets for matches to ACL rules.

•) IPv6: The ACL examines IPv6 packets for matches to ACL rules.

•) MAC: The ACL examines layer 2 frames for matches to ACL rules.

ACL Name Up Shows the name of the ACL applied to trafc entering the AP in the inbound direction.

When a packet or frame is received by the AP, the ACL’s rules are checked for a match. The

packet or frame is processed if it is permitted and discarded if it is denied.

ACL Type Down Shows the type of ACL to apply to trafc in the outbound (AP-to-client) direction, which can

be one of the following:

•) IPv4: The ACL examines IPv4 packets for matches to ACL rules.

•) IPv6: The ACL examines IPv6 packets for matches to ACL rules

•) MAC: The ACL examines layer 2 frames for matches to ACL rules

ACL Name Down Shows the name of the ACL applied to trafc in the outbound direction.

After switching the packet or frame to the outbound interface, the ACL’s rules are checked

for a match. The packet or frame is transmitted if it is permitted and discarded if it is denied.

DiffServ Policy Up Shows the name of the DiffServ policy applied to trafc sent to the AP in the inbound (client-

to-AP) direction.

DiffServ Policy

Down

Shows the name of the DiffServ policy applied to trafc from the AP in the outbound (AP-to-

client) direction.

Table 61 - Client QoS Status

Conguring RADIUS-Assigned Client QoS Parameters

If a VAP is congured to use WPA Enterprise security, you can include client QoS information in the client database

on the RADIUS server. When a client successfully authenticates, the RADIUS server can include bandwidth limits and

identify the ACLs and DiffServ policies to apply to the specic wireless client. ACLs and DiffServ policies referenced

in the RADIUS client database must match the names of the ACLs and DiffServ policies congured on the AP to be

successfully applied to the wireless clients.

The following table describes the QoS attributes that can be included in the client’s RADIUS server entry. If a wireless

client successfully authenticates using WPA Enterprise, each QoS RADIUS attribute that exists for the client is sent

to the AP for processing. The attributes are optional and do not need to be present in the client entry. If the attribute is

not present, the Client QoS setting on the AP is used.

RADIUS

Attribute

ID Description Type/Range

Vendor-Specic (26),

WISPr-Bandwidth-

Max-Down

14122,8 Maximum allowed client reception rate from the AP in bits per

second. If nonzero, the specied value is rounded down to the

nearest 64 Kbps value when used in the AP (64 Kbps minimum).

If zero, bandwidth limiting is not enforced for the client in this

direction.

Type: integer

32-bit unsigned integer value (0-

4294967295)

Vendor-Specic (26),

WISPr-Bandwidth-

Max-Up

14122,7 Maximum allowed client transmission rate to the AP in bits per

second. If nonzero, the specied value is rounded down to the

nearest 64 Kbps value when used in the AP (64 Kbps minimum).

If zero, bandwidth limiting is not enforced for the client in this

direction.

Type: integer

32-bit unsigned integer value (0-

4294967295)

Vendor-Specic (26),

LVL7-Wireless-Client-

ACL-Dn

6132,120 Access list identier to be applied to 802.1X authenticated

wireless client trafc in the outbound (down) direction.

If this attribute refers to an ACL that does not exist on the AP, all

packets for this client will be dropped until the ACL is dened.

Type: string

5-36 characters (not null-terminated)

The string is of the form “type:name”

where: type = ACL type identier:

IPV4, IPV6, MAC

: = required separator character

name = 1-31 alphanumeric characters,

specifying the ACL number (IPV4) or

name (IPV6, MAC)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info