Bedienungsanleitung D-Link DWL-8710AP (Seite 112 von 136) (Englisch)

728146

112

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 112

October 2017

Section 9 - Clustering Multiple APs

Field Description

Pass Phrase Passphrase must be congured for the secure mode to be effective.

Passphrase must be at least 8 characters to a maximum of 63 characters.

Acceptable characters include upper and lower case alphabetic letters, the numeric digits,

and special symbols such as @ and #.

Leading and trailing spaces are not allowed.

Reauthentication

Timeout

This timeout veries the authenticity of the cluster members with higher IP address at

regular intervals. Default value is 300 seconds.

Table 66 - Secure Join Clustering

Note: Currently, Single IP Management and Secure Join Clustering features are available only in

DWL-3610AP and DWL-6610B1AP.

Removing an Access Point from the Cluster

To remove an access point from the cluster, do the following.

1.) Go to the Administration Web pages for the clustered access point.

The Administration Web pages for the standalone access point are displayed.

2.) Click the Cluster > Access Points link in the Administration pages.

3.) Click Stop Clustering.

4.) The change will be reected under Status for that access point; the access point will now show as stand-alone

(instead of cluster).

Adding an Access Point to a Cluster

To add an access point that is currently in standalone mode back into a cluster, do the following.

1.) Go to the Administration Web pages for the standalone access point.

2.) Click the Cluster > Access Points link in the Administration pages for the stand-alone access point.

The Access Points page for a standalone access point indicates that the current mode is standalone.

3.) Type the name or location of the AP in the Location eld to identify the AP within the cluster.

4.) Type the name of the cluster for the AP to join in the Cluster Name eld.

5.) Click Start Clustering.

6.) The access point is now a cluster member. Its Status (Mode) on the Cluster > Access Points page now

indicates Cluster instead of Not Clustered.

Navigating to Conguration Information for a Specic AP

In general, the UAP is designed for central management of clustered access points. For access points in a cluster,

all access points in the cluster reect the same conguration. In this case, it does not matter which access point you

actually connect to for administration.

There may be situations, however, when you want to view or manage information on a particular access point. For

example, you might want to check status information such as client associations or events for an access point. In this

case, you can navigate to the Administration Web interface for individual access points by clicking the IP address links

on the Access Points page.

All clustered access points are shown on the Cluster > Access Points page. To navigate to clustered access points,

you can simply click on the IP address for a specic cluster member shown in the list.

Navigating to an AP by Using its IP Address in a URL

You can also link to the Administration Web pages of a specic access point, by entering the IP address for that

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info