Bedienungsanleitung D-Link DWL-8710AP (Seite 118 von 136) (Englisch)

728146

118

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 118

October 2017

Section 9 - Clustering Multiple APs

Field Description

Neighbours Access points which are neighbours of one or more of the clustered APs are listed in the left

column by SSID (Network Name).

An access point which is detected as a neighbour of a cluster member can also be a cluster

member itself. Neighbours who are also cluster members are always shown at the top of the

list with a heavy bar above and include a location indicator.

The coloured bars to the right of each AP in the Neighbours list shows the signal strength for

each of the neighbour APs as detected by the cluster member whose IP address is shown at

the top of the column.

The color of the bar indicates the signal strength:

•) Dark Blue Bar — A dark blue bar and a high signal strength number (for example 50)

indicates good signal strength detected from the Neighbour seen by the AP whose IP

address is listed above that column.

•) Lighter Blue Bar — A lighter blue bar and a lower signal strength number (for example

20 or lower) indicates medium or weak signal strength from the Neighbour seen by

the AP whose IP address is listed above that column

•) White Bar — A white bar and the number 0 indicates that a neighbouring AP that

was detected by one of the cluster members cannot be detected by the AP whose IP

address if listed above that column.

•) Light Gray Bar — A light gray bar and no signal strength number indicates a

Neighbour that is detected by other cluster members but not by the AP whose IP

address is listed above that column.

•) Dark Gray Bar — A dark gray bar and no signal strength number indicates this is the

AP whose IP address is listed above that column (since it is not applicable to show

how well the AP can detect itself).

Table 71 - Wireless Neighborhood Information

Viewing Details for a Cluster Member

To view details on a cluster member AP, click on the IP address of a cluster member at the top of the page. The

following gure shows the Neighbor Details of the AP with an IP address of 10.90.90.91.

Figure 74 - Viewing Details For A Cluster Member

The following table explains the details shown about the selected AP.

Field Description

SSID The Service Set Identier (SSID) for the access point.

The SSID is an alphanumeric string of up to 32 characters that uniquely identies a wireless

local area network. It is also referred to as the Network Name.

A Guest network and an Internal network running on the same access point must always

have two different network names.

MAC Address Shows the MAC address of the neighbouring access point.

A MAC address is a hardware address that uniquely identies each node of a network.

Channel Shows the channel on which the access point is currently broadcasting.

The Channel denes the portion of the radio spectrum that the radio uses for transmitting

and receiving.

Rate Shows the rate (in megabits per second) at which this access point is currently transmitting.

The current rate will always be one of the rates shown in Supported Rates.

Signal Indicates the strength of the radio signal emitting from this access point as measured in

decibels (Db).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info