140472
18
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
18
Daily Use
Format Selection
AUTO setting :
If picture format signalling data is received, then the most appropriate ZOOM format will be automati-
cally selected. In the absence of this data, the default ZOOM format will be selected(see
page 24, ZOOM AUTO function under FEATURES MENU). Otherwise, the preferred mode of the user can
be forced by repeated pressing of the remote control ZOOM button (A15):
Television Format 17”
The following picture formats are available:
AUTO NORMAL FULL SCREEN ZOOM 14:9 TITLE IN 14:9 ZOOM 16:9 TITLE IN
16:9 AUTO
Television Format 20”
The following picture formats are available:
AUTO WIDE FULL SCREEN ZOOM WATERGLASS AUTO
Remark:
If HD source is received, picture format will automatically set to AUTO.(above various picture
formats are not available)
Menus Language Selection, Child Lock, Clock Setting, Wake Up, Noise Reduction
These functions are available in the Features menu (see description page 24).
CHILD LOCK
This function only allows the TV to be turned on using the remote control. Once the user has set this
CHILD LOCK to ON, it will remain in this condition until the user changes it again.
WAKE UP
It is necessary to have set the clock (either manually or automatically) in order to be able to use this
function. If the clock is not set (--:-- is shown) then the WAKE TIME and WAKE PROG. will not be selecta-
ble. The default setting for WAKE TIME is in the “OFF” position. After each use (the TV turns on according
to the previous setting) the WAKE TIME will be returned to the “OFF” position, conserving always the last
time setting entered ready for re-use.
CLOCK SETTING
The TV will automatically attempt to set the clock when powered on (with the MAIN POWER button). It
takes as reference information embedded in the teletext signal of the channel dened by CLOCK PROG.
Therefore, automatic clock setting is only possible if teletext is available on this channel. If no time is
captured automatically (the clock will show - - : - -), then the TV will try again to set the clock whenever
turning on from standby mode. Alternatively, the user can enter the time manually using the CLOCK
function. However, if this is done the clock will not be periodically updated as would happen if the time
is set automatically. We recommend that the user choose (if available) a CLOCK PROG which allows the
time to be updated automatically.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Daewoo dlp 20d3n wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info