30
Troubleshooting
Please check the following items before calling for the repair services.Please check the following items before calling for the repair services.
Problem
TV set
Control/System lock up
Remote control does
not work.
Local buttons do not work.
No picture and no sound.
No picture.
No colour
Picture is too light or too dark.
The picture is improperly tinted.
No sound.
Aerial
The picture is not sharp.
The picture shakes.
The picture is ghosted.
The picture is spotted(snow).
Pictures has lines and faded
colours.
· The TV may have malfunctioned.
· Switch your TV off and on again with the main. button on the TV set.
· Preform control/system lock up reset (as above).
· Replace the batteres in the remote controller.
· Make sure the Remote sensor window is not under strong light e.g. a
fluorescent lamps.
· Has the child lock been switched on?
· Check that the TV set is switchde on at the main ON/ OFF switch.
· Make sure the brightness and contrast and not set to minimum.
· Make sure the colour is not set to minimum.
· Check the System settings.
· Adjust the Brightness, Contrast.
· Check the tint adjustment (NTSC signal)
· Check that the volume is not set to minimum
· Check sound is not muted.
· Reception may be weak.
· The quality of the broadcast may also be poor.
· Make sure the aerial is facing the correct direction.
· Check that the outside aerial is not disconnected.
· Transmission aerial of amateur radios and cellular phones may cause
interference.
· Position the TV set as far away as possible from devices that may cause
interference.
· There may be interference from automobiles, trains, high voltage lines,
neon lights, etc.
· There may be interference between the aerial cable and power cable.
· Try positioning cables further apart.
· Transmission aerial of amateur radios and cellular phones may cause
interference.
· Position the TV set as far away as possible from devices that may cause
interference.
15
9
24
15
20
20
21
20
20
16
16
Reference pageCheck item
