44
Total time and recorded time are displayed on the TV
screen after pressing [DISPLAY].
Checking the Recording Time
1 Insert a Disc.
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2 Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3 Find the place on the DVD disc tape from
which you want to start recording using the
[PLAY/PAUSE], [FF] and [REW] functions.
And press [STOP].
4 Press [VCR
œœ DVD] on the front panel.
5 Press [ENTER] to select the desired Record
Mode in ‘Copy to Tape’ menu:
• SP (Standard Play)
• LP (Long Play, 2 times SP).
6 Press [VCR œœ DVD] again to start copying.
7 Stop the Copy Process
To stop copying at any time, press [STOP]. You
must stop the Copy process manually when the
DVD movie ends, or the unit may replay and
record over and over again.
If the DVD you are attempting to copy is copy-
protected, you will not be able to copy the disc. It is
not permitted to copy Macrovision encoded DVDs.
If you want to start copy any point of disc
1. Find the place on the DVD (or Disc) from which
you want to start recording using the
[PLAY/PAUSE], [REW] and [FF] functions.
2. Press [COPY] while DVD is in resume stop (»
STOP) mode.
3. Follow the same procedure 5-7.
One Touch Copy - DVD to VHS
Basic Recording
During one touch copy you can search or change REC
SPEED and resume copy.
1 During One Touch Copy, press [PLAY/PAUSE] to
enter COPY EDIT mode.
Copy Edit (DVD ➝VCR)
Copy to Tape
Choose quality and press COPY key
SP
LP
■ Exit
1 Press [PLAY/PAUSE] to pause the disc or tape
during recording.
2 When you want to continue recording, press
[PLAY/PAUSE] or [REC] in DVD mode and press
[REC] in VCR mode.
To Pause the Recording
Note
• To quit One Touch Recording, press [STOP].
To confirm, select ‘OK’. To cancel, select
‘Cancel’.
• The DVD Recorder+VCR will automatically
power off when One Touch Recording ends.
Tip (VCR mode only)
• Always use [PLAY/PAUSE] for best results
when making changes during recording.
For example: To change channels during
recording, first press [PLAY/PAUSE] to put the
unit in Pause mode. Then select the desired
channel on the DVD Recorder+VCR, and
press [REC] again to resume recording.
• You cannot record on the VCR deck and DVD
deck at the same time.
• While the VCR is recording, DVD
playback is impossible. And, while the
DVD is recording, all VCR functions are
disabled.
DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 44 mac001 1200DPI 100LPI
