12
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the
remote display.
2. Make sure the AUTO indicator appears in the remote
display. Using the TEMP.
▼ or ▲ buttons, set the desired
temperature. The desired temperature can be changed up
or down 1 degree from the actual
room temperature. For tempera-
ture setting: 24~28°C
3.Then the unit will automatically operate.
TO SET AUTO MODE
This unit will automatically operate the unit according to its surroundings while in the Auto mode. All you have to set is
the desired temperature and it will control the fan, coolness and dehumidifier. Follow procedures below:
TO SET QUICK MODE
To set this unit to cool at the highest power, follow the procedures below:
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the re-
mote display.
2. Press the MODE button until the Quick indicator
appears in the display.
3.
The unit will then start cooling the room at the highest
power.
1.Press the ON/OFF button on
the remote control to turn the
unit on; the On LED will light
on the indoor unit and “ON”
will light in the remote display.
2.Press the MODE button until the Cool
indicator appears in the display.
3.Using the TEMP. ▼ or ▲ buttons, set the desired
temperature. The desired tem-
perature can be changed up to
32°C and down to 18°C.
4. To select the fan speed, press the FAN
SPEED button until the desired speed
appears in the display (see below).
FAN SPEEDS
“AUTO” The fan will automatically select the fan speed.
“” The fan will operate on low speed.
“” The fan will operate on medium speed.
“” The fan will operate on high speed.
“NATURAL” The fan will randomly cycle through the speeds
simulating a cool breeze.
TO SET COOL MODE
To set the unit to cool the room to a desired temperature, follow the procedures below:
DSB-123L/LH/AH/123PH/F123L 2003.3.4 1:56 PM 페이지12
