To watching Television
Turning on the TV
-33-
Buttons on the TV set have the same functions as those of the remote controller.
Turning on the TV set.
Plug the power cord to the outlet and press the main power at the front controller panel.
A red lamp will light up.
Operating the TV set.
It is LCD-Projection TV characteristics that it takes a little while for the video to be displayed
on the screen when it is turned on. This is not malfunctioning; thus, please be patient and
wait for a moment.
The degree of brightness will decrease insignificantly after 3 minutes is passed. This is not a
breakdown; it is only using a power saving process to maximize the lamp's lifetime.
When the power buttons are pressed, the main power lamp may flicker in green, but the
secondary power lamp may flicker in red and orange alternately. In this case, the TV's main
power has been erroneously pressed, or has been turned off improperly by a power
stoppage or by any other reason. However, please wait for an instant, and the TV will be
back on (the latest 1min. 30sec.) since this is not a malfunctioning of the product.
Press the power button on the remote controller or on the TV set.
When the main power lamp flickers on green, the screen will gradually turn on.
During this instance, the power button will not operate.
When the process is completed, the main power lamp lights on green
TV REMOTE
CONTROLLER
Timer On/Off and the main power lamp flickering in red: Please check whether the air filter and lamp cover is properly fixed
and adjusted.
Timer On/Off and the main power lamp flickering in red and orange alternately: There must be a problem with the lamp. You
may have to change the optical lamp or call for service. (For the lamp exchange, please refer to page 12 of the manual)
Timer On/Off and the main power lamp flickering in orange: There must be a problem in the cooling fan. Please call for
service.
The main power lamp flickering in orange: The product is overheated and its temperature is extremely high for some reason.
Please check if the slots and openings of front and rear panels are blocked impeding its ventilation or if the filter is full of dust
and needs some cleaning. After checking them, press the power button on the remote controller or the one on the TV set to
turn on the TV and operate again.
