Bedienungsanleitung Daewoo DTC-20 (Seite 14 von 18) (Englisch, Holländisch)

45540

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Channel skipping

- You can select skip „YES” or

„NO” using the remote control

RED „Skip” button (A11).

A program with skip „YES”

doesn’t appear on screen

when changing channels with

the PROGRAM UP (A6) /

DOWN (A21) buttons.

Manual Channel Tuning

Choose a starting point

- Select with „Program” the

program from which you want

to start manual tuning. Then the

channel number, the frequency,

the name and the program

number of this program are

displayed in the Install menu.

TV system modiﬁcation

If necessary, you can modify the

TV system :

- Select „system” function.

- Adjust choosing between

FRANCE (L/L’), GB (I), EURO

(B/G), E/ EURO (D/K) systems.

Then, the program displayed on

the screen is changed to the

chosen system.

Channel deleting

- Select the program to delete using

the remote control CURSOR UP

(A6) / DOWN (A21) buttons.

- Press the remote control YELLOW

„Delete” button (A26). The deleted

program is moved to program

number 99 with skip changed to

„YES”. The existing 99 program is

moved to program number 98 and

so on.

Channel searching

- Select the „Frequency” function.

- Press, and hold for more than 1

second, the remote control

CURSOR RIGHT (A20) [LEFT

(A7)] buttons to start up [down]

manual tuning.

- Searching will stop automatically at

the next channel found (to stop

tuning, press the remote control

MENU button (A19)).

Note: You can directly locate a

program by entering the data

into the „channel” or the

„frequency” function.

Perform ﬁne tuning

- If you are unable to get a good

picture or reasonable quality sound

due to poor reception, it is possible

to perform ﬁne tuning.

- Select the „frequency” function.

- Press, for less than 1 second, the

remote control CURSOR

RIGHT(A20) [LEFT(A7)] buttons to

perform up [down] ﬁne tuning in

steps of 0.05MHz (50 kHz).

Channel order changing

- Select the program to move using the

remote control CURSOR UP (A6) / DOWN

(A21) buttons.

- Press the remote control GREEN „Move”

button (A12): the program line background

is highlighted in green, and can be moved

to another position using the remote control

CURSOR UP (A6)/ DOWN (A21) buttons.

- When the desired position is reached,

conﬁrm the new position pressing the

remote control GREEN „Conﬁrm” button

(A12). Then the program line background

will return again to grey.

Enter station name

It is possible to enter your own choice of name

for each program. You can change an existing

name, or enter a name where none exists. If

none exists „- - - - - - -” will be shown in the

Install menu, and program status display ( see

the section PROGRAM STATUS DISPLAY on

page 8).

- Select the „NAME” function.

- Select one of the 7 character positions by

using the remote control CURSOR RIGHT

(A20) / LEFT (A7) buttons to move the cursor.

- Then use the CURSOR UP (A6) /DOWN (A21)

buttons to select the desired character for

that position.

- Repeat the last two instructions for other

positions, as desired.

- Once the name has been entered, press the

OK button (A18) to store it. The name will be

memorised to the program number currently

shown on the „Store To” line. The „Store To”

program number will highlight in red brieﬂy.

Store program in memory

- Select the „store to” function

- Enter the program number you want to

store to either by using the remote control

CURSOR RIGHT (A20) / LEFT (A7) buttons, or

directly by using the remote control NUMBER

0...9 buttons (A3).

- Press the OK button (A18) to conﬁrm.

Remarks: this function can also be used if you

want to copy a program already

memorised to another program

number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Daewoo DTC-20 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info