12
FUNCTION
ON TIMER
Push the ‘TIMER/CANCEL’
button when unit is off.
(REMOCON ONLY)
SLEEP MODE
Push the ‘SLEEP’ button in
‘COOLING’ mode. (REMOCON
ONLY)
OPERATION
1. Timer is changed to as follows by
pushing “TIMER/CANCEL” button.
(1hr→2hr→3hr→4hr→5hr→6hr→8hr
→10hr→12hr→16hr→20hr→24hr→
cancel)
2. The unit starts working after set
time is over in cooling mode with
last temperature set.
3. If you want to cancel timer, push
this button again at any time.
1. SLEEP MODE is changed as
follows by pushing “SLEEP” button.
(L1→L2→cancel)
* L1 Mode
– The unit is off after 4 hours.
– The desired Temp is increased
3°C (5.4°F) for 4 hours.
– Auto swing is selected.
– Fan speed is set to ‘LOW’.
* L2 MODE
– The unit works as follow.
– Auto swing is selected.
– Fan speed is set to ‘LOW’.
2. Set proper desired room
temperature, fan speed and auto-
swing mode.
3. This mode can be selected in
‘COOLING’ mode only.
DISPLAY
1. ‘TIMER’ lamp lights.
2. Setting time is displayed.
3. After a few seconds, display is
changed to current room
temperature. and ‘ROOM TEMP’
lamp lights.
1. ‘L1’ or ‘L2’ is displayed.
2. ‘ROOM TEMP’ and ‘DESIRED
TEMP’ lamp is off.
