516619
24
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
INSTRUCTION MANUAL
DWC-ED1232
Washing Machine Instruction Manual
CONTENTS Page
A NOTE TO YOU
Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer property and safely.
Please read it carefully.
󰥒 Economic wash system
Using artificial intelligence, the washer uses minimum energy and water by
selecting optimal water lever and washing time.
󰥒 Low noise system
The washer minimizes the washing and spinning noises by sensing the
amount of laundry.
󰥒 Child-Lock
The Child-Lock system has been used to prevent children from pressing any
button to change the program during operation.
󰥒 Nano-silver sterilization washing(Option)
By applying very fine silver particles on essential parts inside, the washer
sterilizes up to 99.9% as is done by boiling wash.
󰥒 Air bubble washing(Option)
This is an advanced technology that generates millions of air bubbles inside the drum on washing sequence,
and the bubbles dissolve the detergent particles completely and cleanse all the soil in clothes gently and neatly.
PARTS AND FEATURES.................................................................................................................2
WASHER SAFETY...........................................................................................................................3
INSTALLATION INSTRUCTIONS....................................................................................................4
INLET HOSE CONNECTION...........................................................................................................5
ELECTRICAL REQUIREMENTS .....................................................................................................6
OPERATING YOUR WASHER ........................................................................................................7
THE FUNCTIONS OF THE CONTROL PANEL...............................................................................9
WASHING PROGRAM...................................................................................................................11
WASHING PROCEDURE AND SELECTION ................................................................................12
GUIDE FOR OTHER USEFUL PROGRAMS.................................................................................23
MAINTENANCE .............................................................................................................................27
HOW TO CLEAN THE FILTER ......................................................................................................28
REMOVING STAINS......................................................................................................................29
TROUBLE SHOOTING ..................................................................................................................30
SPECIFICATION............................................................................................................................31
2
PARTS AND FEATURES
The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer.
NOTE
The drawings in the book may vary from your washer model.
They are designed to show the different features of all models coverd by this book,
Your model may not include all features.
ADJUSTABLE LEG
CONTROL PANEL
DOOR
PUMP COVER
DETERGENT CASE
INLET HOSE
(HOT, OPTION)
INLET HOSE
(COLD)
PANEL LOWER
POWER CORD
HOSE DRAIN
Accessories
Hose drain Inlet hose Spanner Manual Cap holder(4EA)
3
Save these instructions
Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the
following basic precautions.
Understanding your responsibilities
• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same
wash. Hazardous fumes can form.
• Unplug power supply cord before attempting to service your washer.
• Do not wash fiberglass material.
Small particles can stick to fabrics washed in following loads and cause skin irritation.
• Do not spray water on the control panel of the washer.
It could cause fire or an electric shock.
• In case of the dual valve model, if you connect only cold water inlet valve, while water
temperature is selected as hot or warm, there can be water leakage from unconnected water
inlet valve.
• This appliance must be grounded.
To avoide electrical shock, use a metal pipe for the ground connection.
• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be used
or stored in or near your washer.
Do not add flammable fluids to your wash
water.These substances give off vapors that
can create a fire hazard or explosion.
• After starting a cycle, do not reach into the
washer until all motions stop.
• Do not tamper with the controls.
• The appliance is not intended for use by
young children or infirm persons without
supervision.
• If the supply cord is damaged, it must be
replaced by the manufacturer, or its service
agent or a similarly qualified person in order
to avoid a hazard.
• If the appliance is supplied from a cord
extension set or electrical portable outlet
device it should be positioned so that it is not
subjected to splashing or ingress of
moisture.
Please ...
• Have only a qualified person install, repair,
or replace parts on washer.
• Maintain washer properly.
• Protect washer from the weather and keep
it where the temperature will not fall below
freezing.
• Do not install the washer at a place of
extremely high humidity. It could cause an
electric shock or a short circuit.
• Connect washer to the correct outlet,
electrical supply, water supply, and drain
supply.
• Door will not open in case of high
temperature inside tub.
• Prevent children from entering machine.
WASHER SAFETY
Read all instructions before using your washer
4
Removing transit bolts
1. Before operating the washer, remove the
transit bolts(4ea) along with the rubber.
• If the bolts are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 4 bolts with the spanner
supplied. Keep the 4 bolts and spanner for
future use.
• Whenever the appliance is transported, the
transit bolts must be refitted.
3. Close the holes with the cap holders supplied.
Location of washer
• Check location where the washer will be installed. Make sure you have everything necessary for
correct installation.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Do not place or store laundry products on top of washer at any times.
• Install the washer on the horizontal solid floor.
If the washer is installed on an unsuitable floor, it could make
considerable noise, vibrate severely and cause a malfunction. If the
washer is not level, adjust leg up or down for horizontal installation.
• Ventilation openings must not be obstructed by carpeting when the
washer is installed on a carpeted floor.
• Leave some space (right & left : 2cm, rear : 10cm).
• In case of built-in installation, the distance between top of the washer
and bottom of upper plate should be at least 3mm.
INSTALLATION INSTRUCTIONS
Laundry
Tub
Washer
approx.
2cm
Drain Hose
5
The washer should be connected to the water mains using new hose sets and old hose sets
should not be reused.
In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the
cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet.
For Ordinary Tap
For Screw-Shaped Tap
INLET HOSE CONNECTION
1 Pull down the collar of the
inlet hose to separate it
from the water tap
adapter.
2 Loosen the four screws
properly in order to fit into
water tap.
3 Fit the water tap adapter
into the water tap and
tighten the four screws
evenly while pushing up
the adapter so that the
rubber packing can stick
to the water tap tightly.
4 Remove the tape, and
screw connector B into
connect A tightly.
5 Connect the inlet hose to
the water tap adapter by
pulling down the collar of
the hose end.
6 Connect the inlet hose
adapter of the hose to the
water inlet of the washer
by turning it clockwise to
be fixed tightly.
• Please check the rubber
packing present inside the inlet
hose adapter of the hose.
1 Connect the inlet hose to
the water tap by screwing
the connector tightly.
2 Connect the connector-
inlet supplied if
necessary.
3Connect the inlet hose
adapter to the water inlet
of a washer and turn it to
be fixed.
*Check the packing in the inlet
TAPE
Connector B
Connector A
Connector
Connector
Rubber
Packing
Hose
Connector
Rubber
Packing
Hose
Connector
inlet
Connector
6
ELECTRICAL REQUIREMENTS
Electrical earth is required on this washer
If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
Dont earth to a gas pipe.
Dont change the power supply cord plug.
Check with a qualified electrician if you are not
sure the washer is properly earthed.
WARNING
Recommended earthing method
Electrical shock hazard : Failure to follow these instructions could result in
death or serious injury.
For your personal safety, this washer must be earthed.
This washer is equipped with a power supply cord A having a earthing plug B.
To minimize possible shock hazard, the cord must be plugged into a mating
earthing-type wall receptacle C. If a mating wall receptacle is not available,
it is the personal responsibility and obligation of the customer to have the
proper earthed wall receptacle installed by a qualified electrician.
C
B
A
Drain system
Never forget to install drain hose before operating your washer.
Open the packing box, and there is a drain hose inside the drum.
Connect the drain hose to the drain outlet at the back side of the washer.
Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer.
When installing the drain hose to tub(sink), secure it tightly with a string.
Proper securing of the drain hose will protect the floor from damage due to water leakage.
When the drain hose is too long, do not force it back into the washer.
This will cause abnormal noise.
Level adjustment
1 If the washer is installed on an
unsuitable floor, it could make
considerable noise, vibrate and
cause a malfunction.
7
OPERATING YOUR WASHER
2 Adjust the level of washer using adjustable legs.
Please check if there is any gap between the
four adjustable legs and the floor.
Turning adjustable legs by the enclosed
spanner, adjust the level of washer and make
it sure that there is no swaying of washer.
After the adjustment is finished, turn the fixing
nuts up tightly so that the washer maintains
the adjustment.
3 Make it sure that the washer does not sway when you press
down the four corners of the washer's top plate.
adjustable leg
Fixing Nut
NOTE
There should be no swaying of washer and all the
adjustable legs should stick to the floor closely.
To obtain the best washing results, you must operate your washer properly.
This section gives you this important information.
Close zippers, snaps, and hooks to avoid
snagging other items.
Remove pin, buckles, and other hard
objects to avoid scratching the washer
interior.
Empty pockets and pull them inside out.
Turn down cuffs and turn synthetic knits
inside out to avoid pilling.
Tie strings and sashes to avoid tangling.
Treat spots and stains.
(See Removing stains on page 21)
Preparing clothes for washing
9
Press this switch to turn the power 'ON' or 'OFF'.
Operation and temporary stop is repeated as it is pressed. When you want to change program in
operating; Press the 'Start/Pause' button Select the program that you want to change Press the
'Start/Pause' button again.
You can select the course you want and each lamp is turned on when that course is selected.
You can select the spin speed you want and each lamp is turned on when that course is selected.
It can be used to pre-engage time for wash from 1 hr to 12 hrs.
You can select the dry condition you want and each lamp is turned on when that course is selected.
If you want to open Door intensionally during operation, press the 'Start/Pause' button and press again
'Door unlock' button.
In this case, signal will be appeared on PCB board, then you can open Door after cooling insideTub
temperature and draining water, also no button functions except Power button.
It can be used to adjust water temperature according to types of the load to be washed.
As this button is pressed, water temperature is selected by Cold
30°C
40°C
60°C
95°C.
You can select the wash course you want and each lamp is turned on when that course is selected.
As this button is pressed, the wash course is selected by 'Quick Wash'(proper load amount :1~2kg)
'Small'(proper load amount :2~3kg)
'Main Wash'
'Pre Wash'
'Soak'
'Quick Wash' .
You can select the rinse time(s) you want and each lamp is turned on when that course is selected.
As this button is pressed, the rinse time(s) is selected by '1'
'Rinse Hold'
'2'
'Rinse Hold'
... ...
'5'
'Rinse Hold'
'1'.
Use this function when you want to protect any accident occurring from handling of washer by a child.
During an operation of washer, press 'TEMP' and 'DRY' buttons simultaneously during 3 second.
If this mode will be set successfully, CHL and remain time will be showen on PCB board alternately.
In Child Lock mode, no button functions except Power button.
If you want to set this mode, press 'TEMP' and 'DRY' buttons simultaneously during 3 second.
And if you want to release this mode, press 'TEMP' and 'DRY' buttons simultaneously again during 3
second.
If you want to change to the desire program, while this mode is working;
1. Press 'TEMP' and 'DRY' buttons simultaneously again during 3 second.
2. Press the 'Start/Pause' button.
3. Select the desired program and press the 'Start/Pause' buttom again.
THE FUNCTION OF CONTROL PANEL
* The Child Lock will be cancelled when power is off.
Change
the desired
program
10
WASHING PROGRAM
Program
Normal
White
Eco-White
Synthetic
Heavy Stain
Wool
Delicate
Blanket
Rapid
Memory
Drum
Cleaning
Fabric type
Colorfast garments (shirts,
night dresses, pajamas,..) and lightly
soiled white cottons(underwares,..)
First check whether laundry is
machine washable.(white cotton,
linen, towel and sheets..)
First check whether laundry is
machine washable.(white cotton,
linen, towel and sheets..)
Polyamide, Acrylic, Polyester,..
Heavy soiled clothes
(blue-jean,climbing clothes, ruck
sack, sports wear,...)
Machine washable woolens with pure
new wool only
Delicated laundry easily damaged.
(silk, curtains,..)
Blanket, curtains,..
Lightly soiled clothes and frequently
washing clothes and small amount of
clothes.
Use to memory program you want.
Use to clean (and dry) the Tub
and Drum.
Proper Temp.
40 °C
(cold,30°C, 60°C)
95 °C
(fixed)
60 °C
(40°C)
40 °C
(cold, 30°C, 60°C)
40 °C
(cold, 30°C, 60°C)
Cold
(fixed, in order to
prevent textile damage)
Cold
(fixed, in order to
prevent textile damage)
Cold
(fixed, in order to
prevent textile damage)
30 °C
(cold,40°C)
Cold
Default data
Wash: main wash
Rinse: 3
Spin: 800
Temp.: 40°C
Wash: main wash
Rinse: 3
Spin: 800
Temp.: 95°C
Wash: main wash
Rinse: 3
Spin: 800
Temp.: 60°C
Wash: main wash
Rinse: 3
Spin: 800
Temp.: 40°C
Wash: pre wash
Rinse: 3
Spin: 800
Temp.: 40°C
Wash: main wash
Rinse: 2
Spin: 400
Temp.: cold
Wash: main wash
Rinse: 2
Spin: 400
Temp.: cold
Wash: main wash
Rinse: 3
Spin: 800
Temp.: cold
Wash: main wash
Rinse: 3
Spin: 800
Temp.: cold
(Dry :cupboard)
Wash: soak
Rinse: 2
Spin: 400
Temp.: cold
(Dry :cupboard)
Maximum Load
Refer to
rating label
Refer to
rating label
Refer to
rating label
Refer to
rating label
Refer to
rating label
Refer to
rating label
Refer to
rating label
Refer to
rating label
Less than 3 kg
without load.
11
1. NORMAL PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature '95°C' is not selected in order to prevent clothes from damaging.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'NORMAL' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
Main wash' and '3' times rinse and '800' rpm spin speed and '40°C' water temperature
are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed' and
'water temperature', select program what you want to change by pressing each
button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water after sensing the
amount of laundry automatically.
1
2
3
4
WASHING PROCEDURE AND SELECTION
12
2. WHITE PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature is set only to '95°C'.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
If much SUDS is happened during operation, the washer will clean SUDS automatically.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'WHITE' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '3' times rinse and '800' rpm spin speed and '95°C' water
temperature are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed' ,
select program what you want to change by pressing each button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water after sensing the
amount of laundry automatically.
1
2
3
4
13
3. ECO-WHITE PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature '40°C' and '60°C' are only selected.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'ECO-WHITE' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '3' times rinse and '800' rpm spin speed and '60°C' water
temperature are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed' and
'water temperature', select program what you want to change by pressing each
button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water after sensing the
amount of laundry automatically.
1
2
3
4
14
4. SYNTHETIC PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature '95°C' and Spin speed '1200' are not selected.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'SYNTHETIC' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '3' times rinse and '800' rpm spin speed and '40°C' water
temperature are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed' and
'water temperature', select program what you want to change by pressing each
button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
15
5. HEAVY STRAIN PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature '95°C' is not selected in order to prevent clothes from damaging.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'HEAVY STRAIN' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Pre wash' and '3' times rinse and '800' rpm spin speed and '40°C' water temperature
are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed' and
'water temperature', select program what you want to change by pressing each
button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
16
6. WOOL PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature 'Cold' is only selected in order to prevent woolens from damaging.
Spin speed '400' and '600' are only selectable.
DRY function is not selected(option function).
DELAY START is not selected.
SOAK and Pre Wash in wash program are not selected.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) in the detergent case.
Softener should be below 'MAX' level.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'WOOL' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '2' times rinse and '400' rpm spin speed and 'Cold' water temperature
are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed',
select program what you want to change by pressing each button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
17
7. DELICATE PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature 'Cold' is only selected in order to prevent delicate clothes from damaging.
Spin speed '400' and '600' are only selectable.
DRY function is not selected(option function).
DELAY START is not selected.
SOAK and Pre Wash in wash program are not selected.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) in the detergent case.
Softener should be below 'MAX' level.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'DELICATE' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '2' times rinse and '400' rpm spin speed and 'Cold' water temperature
are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed',
select program what you want to change by pressing each button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
18
8. BLANKET PROGRAM
Note
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature 'Cold' is only selected in order to prevent delicate clothes from damaging.
Spin speed '400' and '600' and '800' are only selectable.
DRY function is not selected(option function).
DELAY START is not selected.
SOAK and Pre Wash in wash program are not selected.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) in the detergent case.
Softener should be below 'MAX' level.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'BLANKET' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '3' times rinse and '800' rpm spin speed and 'Cold' water temperature
are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed',
select program what you want to change by pressing each button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
19
9. RAPID PROGRAM
Note
The appropriate amount of laundry is below 3 kg.
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
Water temperature 'Cold' and '30°C' and '40°C' are selectable.
Spin speed '1200' is not selected.
All wash program are not selected except main wash..
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) in the detergent case.
Softener should be below 'MAX' level.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'RAPID' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Main wash' and '2' times rinse and '800' rpm spin speed and '30°C' water
temperature (and 'Cupboard' dry condition) are selected automatically.
If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed' and
'water temperature', select program what you want to change by pressing each
button.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
20
10. MEMORY PROGRAM
Note
If you start memorized program, this data will be saved automatically.
If you want to change the setting program during operation, press the 'Start/Pause' button to hold the
operation and change the program you want to change by pressing each corresponding button.
If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then
open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'MEMORY' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
If you want to memorize the 'Washing program' and 'Washing course' and 'Rinse
time(s)' and 'Spin speed' and 'water temperature' (and 'Dry condition'), select
somethings what you want to change by pressing each button and using the program
selection dial.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
21
11. DRUM CLEANING PROGRAM
Note
All programs are not selectable except rinse time(s).
DELAY START is not selected.
Use this program WITHOUT load.
The appropriate cleaning time is one time per a month.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
If you want to clean Drum slightly, use this program without Bleach.
If you want to clean Drum thoroughly, please use the exclusive detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the 'DRUM CLEANING' program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
'Soak' and '2' times rinse and '400' rpm spin speed and 'Cold' water temperature (and
'Cupboard' dry condition) are selected automatically.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
22
GUIDE FOR OTHER USEFUL PROGRAMS
* DELAY START(RESERVED WASHING)
Note
If you want to check the selected program, press the 'Start/Pause' button again.
Preparing washing before starting 'Time Delay';
- Turn on the water tap.
- Load laundry and close Door.
- Place the detergent and fabric softner in the detergent case.
The actual time of finishing is a little different with your selecting time because of water supply condition and
selected water temperature,....
'WOOL' and 'DELICATE' and 'DRUM CLEANING' program are not select 'Time Delay'.
Adding clothes during 'Time Delay' operation is not allowed.
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
Softener should be below 'MAX' level.
Put the detergent into the pre wash room(I marking) only if you want to add prewash.
When you want to use bleach, put it into the main wash room (I I marking) with
detergent.
Press the Power button.
The LED shows only '- --' signal.
Select the program using the program selection dial.
If you press 'Start/Pause' button aftrer pressing Power button without selecting
program, the 'NORMAL' program is selected as default program.
Select the 'Washing course' and 'Rinse time(s)' and 'Spin speed' and 'water
temperature' by pressing each corresponding button.
Press the 'DELAY START' button.
The 'Time Delay' LED is to be lighting.
Select the time delay time you want from 1 hour to 12 hours by pressing button.
The displayed time shows program finishing time.
Press the 'Start/Pause' button.
If you make this program successfully, only 'Time Delay' and 'Lock' LED are lighting.
1
2
3
4
5
23
* ONLY WASH
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Press the Power button.
The LED shows only '- --' signal.
Select the 'WASH COURSE' you want by pressing 'WASH' button.
The 'NORMAL' program is selected automatically.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
* ONLY RINSE
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
Press the Power button.
The LED shows only '- --' signal.
Select the 'RINSE' time(S) you want by pressing 'RINSE' button.
The 'NORMAL' program is selected automatically.
Press the 'Start/Pause' button.
The washer will be operated with locking Door and supplying water.
1
2
3
4
* ONLY SPIN
Put the laundry into the Drum and close the Door.
Press the Power button.
The LED shows only '- --' signal.
Select the 'SPIN CONDITION' you want by pressing 'SPIN' button.
The 'NORMAL' program is selected automatically.
The water temperature is selected to 'Cold' automatically.
Press the 'Start/Pause' button.
The washer will be operated with locking Door.
1
2
3
4
24
* DRY(DWC-ED1232)
Put the laundry into the Drum and close the Door.
Press the Power button.
The LED shows only '- --' signal.
Select the 'DRY CONDITION' you want by pressing 'DRY' button.
As this button is pressed, the dry condition is selected by 'Cupboard' 'Very'
'Time(30, 1:00, 1:30)' OFF 'Low Temp' 'Iron' 'Cupboard'
Press the 'Start/Pause' button.
The washer will be operated with locking Door.
1
2
3
4
Note
Do not use the detergent and softener.
Cold water tap should be opened.
After finishing this program, is showed on PCB board alternately and the smoothing creases
program is conducted during 30 minute and then power is OFF.
'WOOL' and 'DELICATE' and 'BLANKET' program are not select 'DRY'.
Be careful the high temperature of laundry when put out clothes.
A little shrikage and deformation will be possibly happened after drying, so check clothes whether dry or not
previously
If the dry performance is poor, change the selecting temperature.
If youn want to dry with wash, after selecting program, press the 'DRY' button then press 'Start/Pause'
button.
25
MAINTENANCE
Proper care of your washer can extend its life. This section explains how to care for your washer
properly and safely.
Cleaning your washer
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer.
If you store or move your washer during freezing weather, winterize it.
Non-use or vacation care
Operate your washer only when you are at home.
If you are on vacation or dont use your washer for an extended period of time, you should:
Unplug the power supply cord or turn off eletrical power to the washer.
Turn off the water supplier to the washer.
This helps avoid accidental flooding (due to a water pressure surge) while you are away.
Wipe up detergent, bleach, and other spills with
a soft, damp cloth or sponge as they occur.
Occasionally wipe the outside of the washer to
keep its looking like new one.
Clean interior with 250ml of chlorine bleach
mixed with 500ml of detergent.
Run washer through a complete cycle.
Repeat this process if necessary.
Exterior Interior
Turn off water faucet.
Disconnect and drain water inlet hoses.
Run washer on a drain and spin setting (see
page 10) for 1 minute.
Unplug the power supply cord.
Flush water pipes and hoses.
Reconnect water inlet hoses.
Turn on water faucet.
Reconnect power supply cord.
To winterize washer To use washer again
Do not put sharp or metal object in your washer, or they
can damage the finish. Check all pockets for pins, clips,
money, bolts, nuts, etc.
Do not lay these objects in your washer after emptying
pockets.
26
HOW TO CLEAN THE FILTER
Cleaning the water inlet filter
Clean the filter when water leaks from the water inlet.
Cleaning the drain filter
This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc..
If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be
caused.
CAUTION : Be careful when draining if the water is hot.
Cleaning the detergent case
*After a while detergent and fabric softeners leave a deposit in the case;
- It should be cleaned from time to time with a jet of running water.
- If necessary it can be removed completely from the machine by pressing the catch downwards
and by pulling it out.
- To facilitate cleaning, the upper part of the fabric softener compartment can be removed.
*Detergent can also accumulate inside the recess which should be
cleaned occasionally with a brush.
*Once you have finished cleaning, replace the case and run a rinse
cycle without laundry.
1 Pull the power
plug out before
cleaning it.
2 Turn off the water
supply to the
washer and
separate the inlet
hose.
3 Pull the inlet filter
out.
4 Remove the dirt
from the inlet filter
with a brush.
1. Open the lower cover(1) by
using a coin. Remove the cap
hose(2) to pull out the hose.
2.
Unplug the cap hose(2), allowing
the water to flow out. At this time
use a vessel to prevent water
flowing on to the floor. When water
does not flow any more, turn the
pump filter(3) open to the left.
3. Remove any foreign material
from the pump filter(3). After
cleaning, turn the pump filter
clockwise and insert the cap
hose(2) to the original place.
Close the lower cover.
1
100
2
3
2
3
27
Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results.
Soaking helps remove protein-type stains like blood, milk or grass. Prewashing helps loosen soil
before washing.
Stain removal rules
Use warm water for soaking or prewashing stained laundry. Hot water can set stains.
Most stains are easier to remove when they are fresh.
Before treating any stain, find out what kind of stain it is, how old the stain is, what kind of
fabric it is, and whether the fabric is colorfast. (Check the care label)
Washing and drying can set some stains.
Start with cold or warm water. Hot water can set some stains.
When bleach is recommended, use a bleach that is safe for the fabric.
Put the stained area face down on a paper towel or white cloth. Apply the stain remover to the
back of the stain. This forces the stain off fabric instead of through it.
Stain removal guide
REMOVING STAINS
Rinse immediately in COLD water.
If stain remains, soak in cold water with an enzyme prewash.
Use ice in plastic bag to harden the gum.
Scrape off what you can and the sponge with white spirits.
Sponge with COLD water and soak in an enzyme prewash.
If stains persist, rub in a little detergent and rinse in cold water.
Blot up quickly and rinse out in COLD water.
Rub in a little detergent and wash in the maximum temperature allowed for the
fabric type.
Rinse in COLD water and wash normally.
If stain is still apparent, sponge with white spirits.
Rub affected area with white vinegar and then rinse out in COLD water.
Sponge with white spirits.
Treat stiffened areas with enzyme prewash.
Soak in a COLD enzyme prewash, rinse and wash normally.
Rub affected area with bar soap and wash normally.
Treat as soon as possible by sponging with COLD water.
Rub a little detergent on the stain and wash normally.
Sponge with white spirits.
Rub in an enzyme prewash and wash as normally.
Lay the affected area face down on an absorbent cloth and work from the back.
Sponge with white spirits or dry cleaning fluid. Wash normally.
Apply lemon juice and salt and place in the sun. Wash normally.
Sponge with white methylated spirits and wash normally.
Wash in WARM water and detergent.
Moisten area with lemon juice, dry in the sun and wash normally.
If stain persists and the fabric allows, use a bleach.
Brush off any dry mud. Rinse in cold water.
If stain persists rub in a little detergent and wash normally.
Scrape off any fresh paint and sponge with a non flammable dry cleaning fluid
and wash normally.
Treat while still wet, rinse in WARM water and wash normally.
Dampen a cloth with hydrogen peroxide, lay it over the affected area and press
with a fairly hot iron.
Blood
Chewing gum
Cocoa, Chocolate
Coffee
Cream/Milk
Ice cream
Deodorant
Egg
Fabric/Softener
Fruit stains
Grass
Grease and oil
Iron or rust
Lipstick
Mildew
Mud
Paint-oil based
Paint-water based
Scorch marks
STAIN TO REMOVE
28
TROUBLE SHOOTING
Most problems are easily solved if you understand the cause.
Check the following list for problem before calling for service.
If the error mode such as IE, OE, UE were displayed on the control part, in order to solve these
problem, first turn off the power of the washing machine and then turn on the power pressing
Power button.
If PFE error mode was displayed on the control part, in order to solve this problem, first turn off the
power of the washing machine, second turn on the power pressing Power button, third press SPIN
button and last press Start/Hold button.
Note
If and error mode are showed on PCB board, please contact service center.
These cases are not malfunctions;
The sound wing heard during water supply is the operating sound made by the water inlet valve.
The washer will not
operate at all.
Water is not supplied
Error display
The washer will not drain
Error display
The washer will not spin
Vibrating and too noisy
Error display
The washer will stop
during spinning .
Spinning is insufficient.
Error display
Is there a power failure?
Is the power cord correctly connected to an electric outlet?
Did you turn on the power?
Did you press Start/Hold button?
Is there correct amount of laundry in the washer?
Did you connect the inlet hose and open the water tap?
Is the inlet hose or the water tap frozen?
Is the water supply shot off?
Is there any foreign matter blocking up the inlet hose filter?
Is the drain hose frozen or blocked up by dirt?
Is the drain hose kinked or deformed?
Is the end of the drain hose immersed in water?
Is there excessive dirt inside the drain filter?
Is the clothes in the drum collected on one side?
Is the washer installed on an uneven floor or is the vibration
serious?
Is the door open? (The lamp “” will light up in this case.)
Is the filter of the drain pump clogged?
Is the drain pump operated?
Did you use the proper amount of detergent?
Is the drain hose placed higher than 1m above floor?
Is the washer installed on an uneven floor?
Have all the transit bolts removed?
PROBLEM CHECK POINT
29
SPECIFICATION
WIRING DIAGRAM
Dimension (mm)
Unit Weight (kg)
Standard Water Consumption
Spin Speed (RPM)
Operating Water Pressure
630 x 750 x 930 (WxHxD)
80(Net) / 88(Gross)
91
1200
0.03MPa ~ 0.8MPa (0.3kgf/cm
2
~ 8kgf/cm
2
)
MODEL DWC-ED1232
김유석님 TEL
MODEL C-ED1232EPB
BUYER DWC-ED1232_CASTEL_AUSTRALIA_영어
1차 07.9.14 6차
2차 7차
3차 8차
4차 9차
5차 10차
제판
규격
MEMO
VVIISSIIOONN
장광세 실장님
TEL: 730-0660 FAX: 730-3788
07.9.14-CASTEL향 C-ED1232EPB의 설명서는 우선 C-ED1211 혹은 D-ED1211의 설명서로 제작,
SET 그림과 PANEL 부분은 내수용 모델 DWD-114S' 로 넣어주시기 바랍니다.
영문으로된 PANEL은 디자인 연구소에서 접수하여 송부하도록 하겠습니다.
08.03.07-9p(판넬교체)_신규1p
08.03.19-10p(추가), 23p, 24p(삭제) 수정 _ 신규3p
08.03.21-3p 수정_신규1p
08.03.24-10p 수정_신규1p
VISION CREATIVE, INC.
서울 종로구 통의동 6번지
이룸빌딩4층
ABOUT THIS MANUAL
ABOUT THIS MANUAL
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Daewoo DWC-ED1232 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info