Bedienungsanleitung Daewoo HC-6220 (Seite 13 von 16) (Englisch)

561968

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Customizing the Function Settings

Press DISPLAY while the disc is stopped or playback.

Each time you press DISPLAY, the on-screen display on the TV screen changes as follows.

You can view information about a disc and its operational status on the TV screen.

Checking the Total Number of the Titles/Tracks, Current Title/Chapter/Track, Remaining

and Elapsed Time, etc.

In case of VIDEO CD

In case of MP3 CD

Using information on the On-Screen display

1. Press LANGUAGE during playback.

The audio setting is displayed for about 3

seconds.

Selecting a Playback Audio Setting

You can select the preferred audio language and sound

system as a set from those included on the DVD video.

This function lets you temporarily change the audio

language which you selected as the automatic setting in

the setting menu, and choose the sound system if the DVD

video is recorded in more than one sound format.

: [ 1 ENGLISH D 5.1CH

: [ 2 ENGLISH PCM 2CH

: [ 3 KOREA D 5.1CH

◆

About recording systems

This machine uses the Dolby Digital and PCM systems and

cannot play DVD videos recorded in any other sound

system.

Notes

●

Some discs allow you to change audio selections only by using

the disc menu. If this is the case, press MENU and choose the

appropriate language from the selections in the disc menu.

●

Some discs may have only one audio language and sound

recording system set and you cannot change this selection.

●

The “Audio Language” setting in the setting menu is for automatic

selection of the audio language among those included on the

DVD video when the DVD is inserted.

Therefore, the selection in this section will not change the setting

of “Audio Language” in the setting menu. (Occasionally, the audio

language and sound system are selected by the disc.)

A Video CD may left and right channels which contain

sounds or languages on each channel. You can switch

these two channels to hear a preferred sound or language.

CHANNEL : [STEREO]

CHANNEL : [MONO L]

CHANNEL : [MONO R]

CHANNEL : [AUTO L]

CHANNEL : [AUTO R]

Selecting Sound Channels

Note

Dolby Digital 5.1 Channel sound may be displayed as “ D

5.1”.

Selecting the Audio Language/Sound Included on the Disc

Additional Operation

TT 01/03 CH 007/032 00:03:52

1/5 ENG D 5.1CH 1/5 ENG OFF

2. Press LANGUAGE.

Each time you press LANGUAGE, the

language and audio recording system set

changes.

In case of VIDEO CD/AUDIO CD

TRK 4/4 PBC 00:03:52

VCD

TRK 2/14 00:01:12

C D

TT 01/03 CH 007/032 00:03:52

In case of DVD video

Selecting a Setting

When you insert a DVD Video, VIDEO CD, the various functions of the machine will be set (reset) according to the setting

menu. You can customize this setting menu according to your preference.

The setting menu asks you to select a setting category from among SYSTEM, LANGUAGE, AUDIO, VIDEO, SPEAKER, and

DIGITAL. Each selected setup menu will provide you with setting details.

1. Press SETUP button while the disc is stopped.

The on-screen display appears.

2. Press

◀/▶

button to select the setup page.

3. Press

▲/▼

to select the setting menu and then

press

▶

button to move selected item.

4. Press

▲/▼

to select the setting item, then

press ENTER button to confirm.

In case of the password setup menu.

Press

▲/▼/◀/▶

and ENTER to set 4 digits

password number.

Repeat 2 ~ 6 steps to select your desired setting.

5. To finish the setup, Press SETUP button or

press ENTER button after select EXIT SETUP .

During playback, press R/L (repeatedly) to

select the sound channel.

DVD videos that have the mark are recorded using this format.

DOLBY DIGITAL Surround

This 5.1-channel digital surround format lets you individually play

five full-range (20Hz-20kHz) channels (left and right front, center,

two surround channels) plus an LFE(Low Frequency Effect)

channel for the low-range effect sound.

It creates a realistic sound like that heard in theaters and concert

halls.

DSP(Digital Signal Processor)

Press DPLII MODE button repeatedly until

the desired DSP mode appears in the

machine's display.

The DSP indicator lights up when one of the

DSP modes is selected. Each press of the

button changes the DSP mode as follows:

Ex) STEREO

→

MUSIC(PRO LOGIC II)

→

MOVIE(PRO LOGIC II)

→

STEREO

Note : DOLBY PRO LOGIC II Surround

Dolby Pro Logic II creates five full-bandwidth output

channels from two-channel sources.

This is done using an advanced, high purity matrix

surround decoder that extracts the spatial properties of the

original recording without adding any new sounds or tonal

colorations.

The machine automatically detects the sound system when

DOLBY DIGITAL Surround is played back.

While playing back sources other than DOLBY DIGITAL

Surround sounds, you can select the desired DSP mode.

LANGUAGE SETUP PAGE

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

DIVX[R] VOD

EXIT SETUP

AUDIO SETUP PAGE

AUDIO SETUP

AUDIO OUT

MIC SETUP

PROLOGIC

KEY

ECHO

MIC VOL

EXIT SETUP

VIDEO SETUP PAGE

VIDEO SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

EXIT SETUP

SPEAKER SETUP PAGE

SPEAKER SETUP

DOWNMIX

SUBWOOFER

CENTER DELAY

REAR DELAY

FRONT

CENTER

REAR

EXIT SETUP

SYSTEM SETUP PAGE

SYSTEM SETUP

TV SYSTEM

SCREEN SAVER

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

DIGITAL SETUP PAGE

DIGITAL SETUP

OP MODE

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

Note :

●

The setup menu is available only for a DVD function.

●

Some of the item can be changed while a disc isplaying.

Retry while a disc stop, no disc or tray open mode.

Daewoo HC-6220 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info