When the oven is first plugged in, the
display will flash “:0”. If the AC power ever
goes off, the display shows “:0” when the
power comes back on.
1. Touch
CLOCK
pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching
the numbers in sequence.
4. Touch CLOCK pad.
<The display stops blinking, and the
colon starts blinking. If you selected 12
hour clock system, this digital clock
allows you to set from 1:00 to 12:59. If
you selected 24 hour clock system, this
digital clock allows you to set from 0:00
to 23:59>
NOTE: If you attempt to enter an incorrect
time, the time will not be set and it will
return to previous status. Touch the CLOCK
pad and re-enter the time.
When DEFROST is selected, the automatic
cycle divides the defrosting time into
periods of alternating defrost and stand
times by cycling on and off.
1. Touch
DEFROST.
pad.
<The DEF indicator light and “:0” is
displayed>
2. Touch number pads for the desired
defrosting time.
<The display will show what you
touched>
3. Touch START pad.
Note : Your oven can be programmed for
99 minutes 99 seconds(99 : 99)
When you touch START pad, the DEF
indicator starts blinking to show the oven is
in the DEFROST mode. The display counts
down the time to show you how much
defrosting time is left in the DEFROST
mode. The oven beeps during the defrosting
cycle to signal that the food needs to be
turned or rearranged. When the defrosting
time ends, you will hear 3 beeps.
HOW TO SET THE
OVEN CONTROLS
SETTING THE CLOCK
TIME DEFROSTING
9
KOR-180A0A(¿ ) 01.2.28 7:53 PM ˘`9
