9
Plug power supply cord into 230V AC 50Hz
power outlet.
After placing the food in a suitable container,
open the oven door and put it on the glass
tray. The glass tray and roller guide must
always be in place during cooking.
Close the door. Make sure that it is firmly
closed.
The oven door can be opened at any time
during operation by pulling the door handle.
The oven will automatically shut off. To restart
the oven, close the door and then push the
START button.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show " : 0" when the oven is
plugged in, press and hold ZERO ON button
until display is turned on and beep sounds.
Display will be returned to the " : 0 " when the
cooking time ends.
When the STOP/CLEAR button is pushed
during the oven operation, the oven stops
cooking and all information retained. To erase
all information, push the STOP/CLEAR button
once more.
If the oven door is opened during the oven
operation, all information is retained.
If the START button is pushed and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely. The oven will
not start cooking until the door is completely
closed or the program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1
2
3
4
5
6
7
8
9
Make sure the oven is properly installed
and plugged into the electrical outlet.
WATTAGE OUTPUT CHART
•
The power-level is set by push the Power button. The chart shows the display, the power level
and the percentage of power.
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%
Push the Power button Power level (Display) Approximate Percentage of Power
