8
Plug power supply cord into a standard 3-pronged
15 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container,
open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is firmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation by pulling the handle of door. The oven
will automatically shut off.
Each time a button is pushed, a BEEP will sound
to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR button is pushed during the
oven operation, the oven stops cooking and all
information retained. To erase all information(except
the present time), push the STOP/CLEAR button
once more. If the oven door is opened during the
oven operation, all information is retained.
If the START button is pushed and the oven does
not operate, check the area between the door and
door seal for obstructions and make sure the door is
closed securely. The oven will not start cooking until
the door is completely closed or the program has
been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1
2
3
4
5
6
7
8
19
10
11
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
•
The power-level is set by pushing the Power button. The chart shows the display, the power level and the
percentage of power.
Push the Micro Power button Power level (Display) Approximate Percentage of Power
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%
