Bedienungsanleitung Daewoo TC-656B (Seite 4 von 4) (Englisch)

561966

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Listening To The iPod

®®

This model provides 5 different iPod adaptors for different dockable iPod

models. If no iPod will be docked for an extended period of time, it is

recommended to cover the dock connector by the“Dust Cover” (included).

®®

1. Select the suitable iPod adaptor for your iPod model, see the

“iPod adaptor table” in a previous section of this manual.

2. For docking iPod Nano, slide the dock

connector to the left.For other iPod models,

slide the dock connector to the right. Plug the

®®

iPod adaptor on the iPod docking area.

3. Insert your iPod with its Dock Connector

faced downward to the Dock connector of

this unit.

DIR+

+10

FUNCTION

MEM

MODE

SLEEP

SNOOZE/LIGHT

USB

Insert iPod to

the docking

station

Plug the iPod

adaptor to the

docking area

Charging the iPod Battery

With the AC-DC Adaptor powered to the unit, once your iPod connected to

®®

the iPod docking station, the unit recharges the iPod battery (not apply for

the AM or FM radio mode).

4. Press the POWER button to switch on the unit.

5. Press the FUNCTION button repeatedly until the “iPod” indicator shows

on the display then switch ON your iPod .

6. Press the PLAY/PAUSE button from your iPod to pause or resume

iPod playback.

7. Press the VOLUME +/- button on this unit to adjust your desired volume

level.

NOTE: The Volume level cannot be adjusted by the volume control of your

iPod after being docked.

8. If necessary, select other feature by operating those controls from your

iPod as usual. For example, you may select other file (song) by pressing

the or button from your iPod ; depress and

hold the or button of your iPod for fast-rewinding or fast-forwarding

during playback.

9. To remove the iPod from the unit, press and hold the PLAY/PAUSE

button of your iPod for three seconds to switch it off and then gently take

it out from the docking station.

Listening To The MP3 Player

This unit provides an USB docking station for the connection of your USB dockable

MP3 player and playback the music through the speakers of this system.

1. Insert the USB dockable MP3 player into the USB docking station.

2. Press the POWER button to switch on the unit.

3. Press the FUNCTION button repeatedly until the "USB" indicator shows

on the display.

4. Press the PLAY/PAUSE button to start playback music.

5. Press the VOLUME +/- button to adjust your desired volume level.

6. If necessary, you may operate the unit by pressing following buttons:

(a) To select previous or next file (song) by pressing the or button.

(b) Press the PLAY/PAUSE button to pause or resume playback.

(d) Press +10 button to advance 10 songs (files).

7. To remove the MP3 player from the unit, press the STOP button to stop

playback then press the POWER button to switch off the unit. Gently

take out the MP3 player from the docking station.

Listening To An External Audio Source

The unit provides the auxiliary audio signal input for the connection of an

external audio device. You may connect an audio cable (not included) with

3.5 mm stereo plug to the AUX IN Jack located at rear of the unit. Connect

the other end of the cable to a Line Out Jack or Headphone Jack of your non-

dockable MP3 player, CD player and older, non-dockable iPods then listen to

your external source through the speakers of this system.

1. Connect an audio cable (not included) with 3.5 mm stereo plug to the

AUX IN Jack located at rear of the unit.

2. Connect the other end of the cable to a Line Out Jack or Headphone Jack

of your external audio device.

3. Turn on the external audio device.

4. To select auxiliary audio input, press the FUNCTION button repeatedly

until AUX mode is reached. The display will show the “AUX” indicator.

5. The volume level can now be controlled through the main unit. Operate all

other functions on the auxiliary device as usual.

12 13

NOTE:

(1) If you connected the Line Out Jack of your external device then you only

need to adjust the volume control of this unit.If you connected the

Headphone Jack of your external device then you may need to adjust

both the volume control of your external device and the volume control

of this unit to find the most desirable volume setting.

(2) Press the POWER button to turn off the unit when you finish listening.

Don't forget to switch off the power of your external device as well.

Specifications

Power Supply

Power Adaptor :

Input:

AC 120V ~ 60 Hz (For USA)

AC 230V ~ 50 Hz (For EU)

AC 100V ~ 50/60 Hz (For Japan)

AC 240V ~ 50Hz (For Australia)

Output:

DC 10V / 1400mA

Battery Back-up for Clock: DC1.5V “AAA” (UM-4) Battery x 2 (not included)

Frequency Range

USA's Radio Broadcast System AM 520 – 1710 kHz, 10kHz tuning step

FM 87.5 – 108 MHz, 0.1MHz tuning step

EU's Radio Broadcast System AM 522 – 1620 kHz, 9kHz tuning step

FM 87.5 – 108 MHz, 0.05MHz tuning step

Japan's Radio Broadcast System AM 522 – 1629 kHz, 9kHz tuning step

FM 76.0 – 108 MHz, 0.1MHz tuning step

Australia's Radio Broadcast System Same as EU's system

• Do not subject the unit to excessive force, shock, dust or extreme temperature.

• Do not tamper with the unit's internal components.

• Clean your unit with a damp (never wet) cloth. Solvent or detergent should

never be used.

• Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

• Keep your unit away from heating appliances and sources of electrical noise

such as fluorescent lamps or motors.

Resetting the Unit

If the unit is subjected to a severe power surge or electric shock, it is possible

that the internal microcontroller may “lock up” and the unit will not respond to

any commands from the top panel controls.

1. In this event, unplug and then reconnect the AC power plug into the wall

outlet.

2. Use a straightened paper clip, toothpick, or similar blunt object to press the

RESET button located at rear of the main unit (see figure below). The reset

operation clears the system memory and all of your previous settings will

be erased.

Caution: DO NOT use a sharp, pointed object to press the RESET button.

It may damage the reset switch inside the unit.

RESET

AUX

DC 10V

EXTERNAL FMANT

RESET button

Care and Maintenance

14 15

THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE

SET ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Daewoo TC-656B Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info