Bedienungsanleitung Dahon General (Seite 7 von 20) (Englisch)

780003

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

WARNING:

If your seatpost projects from the frame

beyond the minimum or maximum

extension marks, it is possible that your

seatpost may break, causing you to lose

control or fall.

Saddle Position

Fit

WARNING:

Prior to riding and after any saddle adjustment,

be sure that the saddle adjusting mechanism is

properly tightened. A loose saddle clamp or seatpost

binder can cause damage to the structure. A correctly

tightened saddle will not allow movement in any

direction. Periodically check to make sure that the

saddle adjusting mechanism is properly tightened.

Failure to inspect may cause loss of control and injury.

WARNING:

The stem’s minimum insertion mark should not be

visible above the headset. If the stem is extended

beyond its minimum or maximum marks it could

cause damage or break the fork's steering tube,

which could cause you to lose control and fall.

WARNING:

If a bolt for a stem binder is insufficiently tightened,

it may compromise steering and cause you to lose

control and fall. To avoid this, check for tightness

by placing the front wheel of the bicycle between

your legs and attempting to twist the handlebar/stem

assembly.

NOTE:

Periodically consult your local dealer if your bicycle

has a suspension seatpost.

NOTE:

Making small changes within the saddle position

will make a big difference in the performance and

comfort level of your ride. To find your best saddle

position, change the positioning by making several

small adjustments.

NOTE:

Any local dealer can change the angle

of the handlebar or bar-end extended.

Correct saddle adjustment and placement

is a significant factor in getting the best

performance, as well as comfort from your

bicycle. If you do not feel comfortable in

your saddle position, see your local dealer.

Saddles can be adjusted

in 3 directions:

• Up and down adjustment.

Check for correct saddle height:

»» Sit on the saddle.

»» Place your heel on the pedal.

»» While on the pedal, rotate the crank until

heel of the foot is in the downward position,

and the crank arm is parallel to the

seat tube.

If your leg is not completely straight, your

saddle height may need to be adjusted. If

your hips are uneven when your foot extends

to reach the pedal, the saddle is too high.

If the saddle is too low, your leg will bend at

the knee when your heel is on the pedal.

Once the height of the saddle is correct, make

sure that the seat post does not project from

the frame beyond the minimum or maximum

extension marks.

• Front and back adjustment - The saddle

can be adjusted to go forward or backward

to help you get the optimal position on the

bike. Ask your dealer to set the saddle for

the best possible outcome while riding.

• Saddle angle adjustment – Most people

prefer a horizontal saddle, but some riders

like the saddle nose angled up or down.

Your dealer can adjust the saddle angle to

your preferred riding position.

Handlebar Height and Angle

The bolts are not properly tightened if you are able to:

1. Twist the stem (in relation to the front wheel),

2. Turn the handlebars (in relation to the stem), or

3. Turn the bar-end extensions (in relation to the

handlebar)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dahon General Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dahon General

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info