Bedienungsanleitung Daikin CTXS15K3V1B (Seite 13 von 20) (Englisch)

642461

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English 7

English

Indoor Unit Installation

3-2. Left-side, left-back, or left-bottom piping

1) Attach the drain hose to the underside of the refrigerant pipes

with adhesive vinyl tape.

2) Be sure to connect the drain hose to the drain port in place of

a drain plug.

3) Shape the refrigerant pipes along the pipe

path marking on the mounting plate.

4) Pass the drain hose and refrigerant pipes

through the wall hole, then set the indoor

unit on mounting plate hooks, using the

markings at the top of the indoor unit as

a guide.

5) Pull in the inter-unit wire.

6) Connect the inter-unit pipes.

7) Wrap the refrigerant pipes and drain hose together with insulation tape as

shown in the figure on the right (in case of setting the drain hose through

the back of the indoor unit.

8) While exercising care so that the inter-unit wire does not catch indoor unit,

press the bottom edge of indoor unit with both hands until it is firmly caught

by the mounting plate hooks. Secure indoor unit to the mounting plate with

indoor unit fixing screws (M4 × 12L).

3-3. Wall embedded piping

Follow the instructions given under left-side, left-back, or left-bottom piping.

1) Insert the drain hose to this depth so it won’t be pulled out of the drain pipe.

How to replace the drain plug and drain hose

• Replacing onto the left side

1) Remove the insulation fixing screw on the

right and remove the drain hose.

2) Remove the drain plug on the left side and

attach it to the right side.

3) Insert the drain hose and tighten with

included insulation fixing screw.

* (Forgetting to tighten this may cause

water leakages.)

Drain hose attachment position

* The drain hose is on the back of the unit.

Front side of unit

Attachment on the right side (factory default)

Attachment on the left side

Drain hose Drain hose

Insulation

ﬁxing screw

Insulation

ﬁxing screw

Left side Right side

Remove pipe port cover here for left-bottom piping.

Remove pipe

port cover

here for left-

side piping.

Left-bottom piping

Left-side

piping

Left-back

piping

How to set drain plug

No gap.

Do not apply lubricating

oil (refrigerant oil) to the

drain plug when inserting it.

The application of lubrication

oil to the drain plug will deteriorate

the plug and cause drain leakage

from the plug.

Insert a hexagonal wrench (4mm).

Drain

hose

Caulk this hole

with putty or

caulking material.

Bind with adhesive

vinyl tape.

Mounting plate

Wrap insulating tape around the

bent portion of refrigerant pipes.

Overlap at least half the width of

the tape with each turn.

Refrigerant

pipes

Drain hose

Bottom frame

Indoor unit ﬁxing screw

(M4 × 12L) (2 locations)

Mounting

plate

Inter-unit wire

Inner wall

Vinyl chloride

drain pipe

(VP-30)

Drain hose50mm

or more

Insert drain hose

to this depth so

it won’t be pulled

out of drain pipe.

Outer wall

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Daikin CTXS15K3V1B Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Daikin CTXS15K3V1B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info