Bedienungsanleitung Daikin EHBX08CA (Seite 9 von 24) (Englisch)

554157

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

4 Operation

User reference guide

EHBH/X04+08+16CA + EHVH/X04+08+16CA

Daikin Altherma - Low Temperature Split

4P313778-1B – 2012.11

Situation Description

Before you have changed the

mode from scheduled to preset

value, and now you temporarily

overrule the preset value.

Desired temperature = custom

temperature = 21°C.

After 2 hours, the schedule will

be used again (17:20 => 20°C).

To set the overrule period

1 Go to [7.2]: > User settings > Temperature lock.

2 Select a value and press :

▪ Permanent

▪ hours (2, 4, 6, 8)

Result: This overrule period (Temperature lock) remains valid until

you change it again.

Usage example: You have a party

If you are in the following situation:

▪ You are using the following room temperature schedule:

▪ 17:00 preset value (Comfort) = 20°C

▪ 23:00 preset value (Eco) = 18°C

▪ Tonight you have a party and you want to use the preset value

(Comfort) until 02:00.

Then you can do the following:

1 Set the overrule period (Temperature lock) to 6 hours.

2 At 20:00, go to the room temperature home page (Room).

3 Press

to select .

Result: The preset value (Comfort) will be used until 02:00.

After that, the schedule will be used again.

Usage example: You go away for a couple of hours

If you are in the following situation:

▪ You are using the following room temperature schedule:

▪ 08:00 preset value (Comfort) = 20°C

▪ 23:00 preset value (Eco) = 18°C

▪ At 14:00, you go away for 3 hours.

Then you can do the following:

1 Set the overrule period (Temperature lock) to 2 hours.

2 Go to the room temperature home page (Room).

3 Press

to select .

Result: For the next 2 hours, the room will NOT be heated to the

scheduled 20°C, but to the preset value (Eco = 18°C). After the

2 hours, the room will heat up again to the scheduled 20°C.

Advantage:

You save energy because you do NOT heat the room unnecessary,

and by the time you come home the room is warm again.

Using the leaving water temperature home pages

(main + additional)

INFORMATION

The leaving water is the water that is sent to the heat

emitters. The desired leaving water temperature is set by

your installer in accordance with the heat emitter type.

Example: Under floor heating is designed for lower leaving

water temperature than radiators and heat pump

convectors and/or fan coil units. You only have to adjust

leaving water temperature settings in case of problems.

Typical leaving water temperature home pages

Main zone:

User profile = Basic User profile = Detailed

35°C

1 5 : 2 0

D e s i r e d t e m p e r a t u r e

Mon

LWT main

35°C

1 5 : 2 0

2 2 : 0 0

D e s i r e d t e m p e r a t u r e

Mon

LWT main

Mon

Additional zone:

User profile = Basic User profile = Detailed

45°C

1 5 : 2 0

D e s i r e d t e m p e r a t u r e

Mon

LWT add

45°C

1 5 : 2 0

2 2 : 0 0

D e s i r e d t e m p e r a t u r e

Mon

LWT add

Mon

To read out the desired leaving water temperature (main +

additional)

Go to the leaving water temperature home page (LWT main or LWT

add).

To adjust/overrule the leaving water temperature (main)

INFORMATION

You cannot adjust/overrule the leaving water temperature

(main) for room thermostat control with linked leaving

water temperatures. However if necessary, you can adjust

the desired leaving water temperature (main) by adjusting

preset values.

INFORMATION

Adjusting the leaving water temperature is permanent

unless the leaving water temperature is according to a

schedule. In that case the overruling is valid until the next

scheduled action.

1 Go to the main leaving water temperature home page (LWT

main).

2 Press

or to adjust/overrule.

Example:

35°C 37°C

To adjust the leaving water temperature (additional)

1 Go to the additional leaving water temperature home page

(LWT add).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Daikin EHBX08CA Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Daikin EHBX08CA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info