MODE Usage and Function
AUTO FAN
Automatic airflow rate adjustment
FAN setting (Quiet, Low, Standard, High) is automatically adjusted according to the degree of air
impurity.
Purifying capacity increases as airow rate rises.
• Degree of air impurity corresponds to the volume of dust and the intensity of odours in the ambient air.
ECONO
Saving energy
In Power saving mode within ECONO MODE, the FAN setting automatically switches between Quiet
and Low only. Power consumption (*1) and operating sounds are reduced.
If the air is clean, after a short while, Monitoring mode automatically activates.
Recommended for use during sleep hours.
*1 By comparison to AUTO FAN MODE (approx. 10.3Wh), power consumption in ECONO MODE (approx.
6.7Wh) is approx. 3.6Wh lower.
Test conditions: operation in 10m
2
area over 1 hour. Assuming 1 cigarette was smoked immediately
after the unit was turned on.
Power saving mode
If the air is clean, after
a short while...
Monitoring mode
• The fan starts and stops periodically. Dust
and odours are monitored.
• The following functions are turned off, further
reducing power consumption.
Streamer
OFF
Active plasma ion
OFF
If dust or odours are
detected...
FAN setting switches
automatically between
Quiet and Low.
• As the FAN setting is limited to Quiet and Low, air purifying capacity is reduced.
• As air is not drawn in when the fan has stopped, the dust/PM2.5 sensor and odour sensor reduce in
sensitivity. To prevent this reduction in sensitivity, turn Monitoring mode OFF.
►
Page 18
• FAN setting is adjusted automatically. Airow cannot be adjusted manually.
ANTI-
POLLEN
Reducing pollen levels
A gentle air current is created by switching every 5 minutes between the FAN setting Standard and
Low so that pollen can be drawn in and caught before it reaches the oor.
• FAN setting is adjusted automatically. Airow cannot be adjusted manually.
