Bedienungsanleitung Dali Fazon F5 (Seite 8 von 22) (Deutsch, Englisch, Dänisch)

745056

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

5.0 RUNNING- IN

Like any mechanical system, a loudspeaker requires a “running-in” period to perform at its

best. You will experience a gradual increase in sound quality during the ﬁrst period of use. The

break-in period will vary depending on use and playback volume. You should expect up to 100

hours of playback until maximum performance is reached. Unlike other mechanical systems,

the life-span of a loudspeaker is increased by normal, regular playback of music.

6.0 CLEANING & MAINTENANCE

Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in

all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,

as they are very fragile. Grille fronts can be cleaned with a clothes brush and wiped with a

wellwrung, lint-free cloth and mild all-purpose cleaner.

7.0 DISPOSAL

If you want to dispose of this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation that

requires proper treatment, recovery and recycling. Private households in the EU member states,

Switzerland, Liechtenstein and Norway may return their used electronic products free of charge

to designated collection facilities or to a retailer (if you purchase a similar new one). If you reside

in countries not mentioned above, please contact your local authorities for the correct method

of disposal. By following this process, you will ensure that your disposed product undergoes the

necessary treatment, recovery and recycling and thus prevent potential negative effects on the

environment and human health.

8.0 POWER AND ACOUSTIC PRESSURE

How loud a speaker is able to play and still sound good is completely dependent on the signal

it has to reproduce. So, in practice, it is not possible to deﬁne an unequivocal level for use in

comparing different speakers.

Lots of pure, undistorted output from a large ampliﬁer is better than a distorted signal from a

small ampliﬁer stretched beyond its capacity. The signal from a distorting (clipping) ampliﬁer

contains much more high-frequency information than an undistorted signal, and therefore puts

a heavy strain on the tweeter. Consequently, speakers are often damaged by small ampliﬁers,

having to work too hard - and very rarely by large ampliﬁers, which are practically running idle.

It is worth noting that turning tone controls above the neutral setting signiﬁcantly burdens

both speakers and ampliﬁer. On a good sound system tone controls should only be used to

compensate for poor recordings and not to permanently compensate for weaknesses elsewhere

in the system.

Therefore DALI recommends that the tone controls generally be set to the neutral position, and

you achieve your desired sound image through correct positioning of the speakers. Ensuring

that you keep the volume low enough for the sound to remain clear and undistorted will

minimize the strain on both speakers and ampliﬁer.

All DALI loudspeakers are designed with linear impedance for an optimal ampliﬁer load. The

result is a signiﬁcantly more open and detailed sonic image.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Fazon F5 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info